Limit switch 3/2 NC 3/2 NC strut tire monostable side fittings diameter M5 - Aignep: ADAJUSA : price

Limit switch 3/2 NC 3/2 NC strut tire monostable side fittings diameter M5 - Aignep: ADAJUSA : price

Limit switch 3/2 NC 3/2 NC strut pneumatic tire monostable side fittings diameter M5 - Aignep

€15.80 Tax included

€13.06 tax excl.

02VE03NCB5

Limit switch pneumatic actuated by M5 3 way and 2 positions strut actuator, fittings located on the side for M5 outside diameter pipe. The type of limit switch valve is normally closed (NC).

Series: 02V
Part number: 02VE03NCB5

ESQUEMAPASATABIQ NORMATIVAMICROVALVULA

Representative image for illustrative purposes, the item supplied will correspond to the specifications shown.

No queries yet, leave the first!

Limit switch pneumatic actuated by means of a strut with integrated quick-connect fittings for M5 external pipe diameter. The valve's idle state is normally closed (NC), i.e. when not pressed there is no air at the outlet, as the air cannot pass through, and when actuated it allows air to pass through and there is pneumatic pressure at the outlet.

Manufacturer: Aignep

Part number: 02VE03NCB5
Thread: M5
Valve body: anodized aluminum
Spring material: stainless steel
Seals: NBR
Fittings: quick couplings for pipe diameter M5 side connection.
Operating pressure: 2 ÷ 10
Operating temperature °C: -10 ÷ +60
Flow rate at 6 bar ΔP 1 bar Nl/min: 100

02VE03NCB5

Material for professional use, install in compliance with the regulations in force at the place of installation.

For further information you can download the technical data sheet by clicking on the "Attachments" tab

AIGNEP 02V series catalog

Download (4.09MB)

Questions

Be the first to ask a question about this product!

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

3/2 W3501000101 pneumatic stroke end | Price Metal Work Adajusa

3/2 W3501000101 pneumatic stroke end | Price Metal Work Adajusa 2

Pneumatic Limit switchs

Limit Switch tyre 3/2 NO rear fittings diameter 4 - Metal Work

€19.32 (€15.97 tax excl.)

Limit Switch pneumatic (mini-valve) with push-button drive, fittings located at the rear for 4 mm outer diameter tube. The valve type of the limit switch is normally open (NO).Reference: W3501000101 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic stroke end 3/2 W3501000100 Metal Work Price Adajusa

Pneumatic stroke end 3/2 W3501000100 Metal Work Price Adajusa 2

Pneumatic Limit switchs

Limit Switch tyre 3/2 NC rear fittings diameter 4 - Metal Work

€17.64 (€14.58 tax excl.)

limit switch pneumatic with pushbutton drive, fittings (axial connections) located at the rear for 4 mm outer diameter tube. The valve type of the limit switch is normally closed (NC). Reference: W3501000100 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch W3501001301 Metal Work | 3/2 cam tyre ADAJUSA | price

Limit Switch W3501001301 Metal Work | 3/2 cam tyre ADAJUSA | price 2

Pneumatic Limit switchs

Limit Switch 3/2 NC one-way cam diameter 4 side fittings - Metal Work

€23.96 (€19.80 tax excl.)

Limit Switch pneumatic with unidirectional cam drive, fittings located on the side, for outer diameter tube of 4 mm. The valve type of the limit switch is normally closed (NC). Reference: W3501001301 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch W3501001311 3/2 Metal Work | ADAJUSA | price

Pneumatic Limit switchs

Limit Switch pneumatic 3/2 NC one-way cam diameter M5 side fittings - Metal Work

€23.49 (€19.41 tax excl.)

Limit Switch pneumatic with unidirectional cam drive, fittings located on the side, for M5 outer diameter tube. The valve type of the limit switch is normally closed (NC). Reference: W3501001311 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch 3/2 single-way cam 4 mm W3501000300 Metal Work | ADAJUSA | price

Pneumatic Limit switchs

Limit Switch pneumatic 3/2 NC unidirectional cam diameter M5 - Metal Work

€22.34 (€18.46 tax excl.)

Limit Switch tire with unidirectional cam drive, fittings located at the rear, for M5 outer diameter tube. The valve type of the limit switch is normally closed (NC). Reference: W3501000300 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch 3/2 single-way cam M5 W3501000311 Metal Work | ADAJUSA | price

Pneumatic Limit switchs

Limit Switch tyre 3/2 NC one-way cam diameter M5 rear fittings - Metal Work

€22.26 (€18.40 tax excl.)

Limit Switch tire with unidirectional cam drive, fittings located at the rear, for M5 outer diameter tube. The valve type of the limit switch is normally closed (NC). Reference: W3501000311 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

16 other products in the same category:

Limit Switch W3501001301 Metal Work | 3/2 cam tyre ADAJUSA | price

Limit Switch W3501001301 Metal Work | 3/2 cam tyre ADAJUSA | price 2

Pneumatic Limit switchs

Limit Switch 3/2 NC one-way cam diameter 4 side fittings - Metal Work

€23.96 (€19.80 tax excl.)

Limit Switch pneumatic with unidirectional cam drive, fittings located on the side, for outer diameter tube of 4 mm. The valve type of the limit switch is normally closed (NC). Reference: W3501001301 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch tyre 3/2 NO M5 Metal Work | ADAJUSA | price

Limit Switch tyre 3/2 NO M5 Metal Work | ADAJUSA | price 2

Pneumatic Limit switchs

Limit Switch tyre 3/2 NO rear fittings diameter M5 - Metal Work

€19.18 (€15.85 tax excl.)

Limit Switch pneumatic (mini-valve) with push-button drive, fittings located at the rear for M5 outer diameter tube. The valve type of the limit switch is normally open (NO).Reference: W3501000110 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit switch pneumatic 3/2 NC side fittings diameter 4 mm- Aignep | ADAJUSA | price

Pneumatic Limit switchs

Final de carrera neumática 3/2 NC racores laterales diámetro 4- Aignep

€18.51 (€15.30 tax excl.)

Limit switch 4 mm pneumatic 3 way and 2 positions, fittings located on the side for tube outer diameter of 4 mm. Prepared for mounting with emergency push button or similar. Series: 02VPart number: 02VD03NCX1 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic stroke end 1/8 3/2 EPA-106 | Buy Mindman adajusa

Pneumatic Limit switchs

Limit Switch tyre cams 1 direction 1/8 3/2 NC - Mindman

€27.26 (€22.53 tax excl.)

Limit Switch pneumatic,cam 1 direction, mechanically operated pneumatic valve, 1/8 3-way thread normally closed (NC). The limit switch is driven by a button with a metal roller.Reference: 281EPA106 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch 1/8 5-way tyre - Metal Work - adajusa.es

Pneumatic Limit switchs

Limit Switch 1/8 5-way strut tyre - Metal Work

€30.78 (€25.44 tax excl.)

limit switch pneumatic drive with pushbutton drive, 1/8" 5-way mechanical drive. Drive by mechanical strut spring return. Reference: MEV 25 TAS OO - 7001000110 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch pneumatic roller lever 3/2 NO W3501000211 Metal Work | ADAJUSA | price

Pneumatic Limit switchs

Limit Switch lever roller 3/2 NO diameter M5 rear fittings - Metal Work

€22.42 (€18.53 tax excl.)

limit switch lever-operated tire with roller, fittings (axial connections) located at the rear for M5 outer diameter tube. The valve type of the limit switch is normally open (NO). Reference: W3501000210 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic stroke end 1/8 3/2 EPA-103 | Buy Mindman adajusa

Pneumatic Limit switchs

Limit Switch high cam piston tyre 1/8 3/2 NC - Mindman

€27.26 (€22.53 tax excl.)

Limit Switch pneumatic,high piston with roller, mechanically operated pneumatic valve, 1/8 thread 3 ways normally closed (NC). The limit switch is driven by a button with a metal roller.Reference: 281EPA103 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch tyre piston NO 3/2 diameter M5 Metal Work |ADAJUSA | price

Pneumatic Limit switchs

Limit Switch tyre piston NO 3/2 diameter M5 - Metal Work

€18.67 (€15.43 tax excl.)

Limit Switch pneumatic,fittings located on the side, for tube outer diameter of M5. The valve type of the limit switch is normally open (NO). Reference: W3501000411 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch pneumatic roller 3/2 NC M5 W3501001211 Metal Work | ADAJUSA | price

Pneumatic Limit switchs

Limit Switch pneumatic roller 3/2 NC side fittings diameter M5 - Metal Work

€21.89 (€18.09 tax excl.)

Limit Switch pneumatic with roller drive, fittings located on the side, for 5M outer diameter tube. The valve type of the limit switch is normally closed (NC). Reference: W3501001211 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch tyre piston NC 3/2 diameter 4 Metal Work |ADAJUSA | price

Pneumatic Limit switchs

Limit Switch tire piston NC 3/2 diameter 4 - Metal Work

€20.35 (€16.82 tax excl.)

Limit Switch pneumatic,fittings located on the side, for tube outer diameter of 4 mm. The valve type of the limit switch is normally closed (NC). Reference: W3501001401 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch tyre piston NO 3/2 diameter 4 mm Metal Work |ADAJUSA | price

Pneumatic Limit switchs

Limit Switch tyre piston NO 3/2 diameter 4 - Metal Work

€18.78 (€15.52 tax excl.)

Limit Switch pneumatic,fittings located on the side, for tube outer diameter of 4 mm. The valve type of the limit switch is normally open (NO). Reference: W3501000400 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch pneumatic roller lever 3/2 NO W3501000201 Metal Work | ADAJUSA | price

Limit Switch pneumatic roller lever 3/2 NO W3501000201 Metal Work | ADAJUSA | price 2

Pneumatic Limit switchs

Limit Switch roller lever 3/2 NO diameter 4 rear fittings - Metal Work

€22.94 (€18.96 tax excl.)

limit switch lever-operated tire with roller, fittings (axial connections) located at the rear for 4mm outer diameter tube. The valve type of the limit switch is normally open (NO). Reference: W3501000201 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch 1/8 3/2 valve for | pushbutton mounting ADAJUSA | price

Pneumatic Limit switchs

Limit Switch 1/8 3/2 NC pneumatic for panel actuators - Metal Work

€51.12 (€42.25 tax excl.)

limit switch pneumatic valve 1/8 3/2 for mounting with emergency pushbutton or similar Reference: 7010001800 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit switch short roller tire 3/2 NC monostable with side fittings diameter M5 - Aignep: ADAJUSA : price

Pneumatic Limit switchs

Limit switch short roller tire 3/2 NC monostable with side fittings diameter M5 - Aignep

€17.73 (€14.65 tax excl.)

Limit switch pneumatic with M5 roller actuator 3 way and 2 positions, fittings located on the side for M5 O.D. tube. The type of limit switch valve is normally closed (NC). Series: 02VPart no.: 02VR03NCB5 Representative image for illustrative purposes, the item supplied will correspond to the specifications shown.

Limit Switch 1/8 5-way strut servo-pilot Metal Work - ADAJUSA

Pneumatic Limit switchs

Limit Switch 1/8 5-way strut servo-pilot - Metal Work

€54.00 (€44.63 tax excl.)

limit switch pneumatic drive with push-button drive, 1/8" 3-way mechanical drive. Sensitive strut drive. Reference: 7001000210 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit Switch pneumatic roller lever 3/2 NC W3501000211 Metal Work | ADAJUSA | price

Pneumatic Limit switchs

Limit Switch lever roller 3/2 NC diameter M5 rear fittings - Metal Work

€20.67 (€17.08 tax excl.)

limit switch lever-operated tire with roller, fittings (axial connections) located at the rear for M5 outer diameter tube. The valve type of the limit switch is normally closed (NC). Reference: W3501000211 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Customers who bought this product also bought:

"T" fitting with center thread 1/8 tube diameter 6

Intermediate "T" fittings

T fitting with central thread 1/8 tube 4 technopolymer - Metal Work

€3.41 (€2.82 tax excl.)

Tube "T" fitting 4mm quick connection and center socket with 1/8" thread. Manufacturer: Metal Work Reference: 2L35002 Representative image for illustrative purposes, the article supplied will correspond to the indicated specifications.

Cylinder fixing Squad diameter 20/25 Metal Work | ADAJUSA | price

Pneumatic cylinder accessories

Squad fixing cylinder diameter 20/25

€3.07 (€2.54 tax excl.)

Fixing Squad for pneumatic cylinder diameter 20 or 25mm. This flange is valid for cylinders manufactured according to ISO 6432 standard of any brand. Reference: W0950200001 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Deep groove ball roller

Bearing 6204-2RS FAG 20x47x14mm

€5.07 (€4.19 tax excl.)

Ball bearing 6204-2RS, dimensions 20x47x14mm. With two sealing caps for closure, rubber coated (2RS). Brand FAG. Ref: 6204-C-2HRS-C3

Pneumatic distributor valve 1/8 5 way 5/2 bistable Aignep | ADAJUSA | price

Pneumatic distributor valve 1/8 5 way 5/2 bistable Aignep | ADAJUSA | price 2

Pneumatic valves 1/8

Pneumatic valve 1/8 5 way bistable - Aignep

€42.14 (€34.83 tax excl.)

Valve 1/8 5 way 2 positions bistable. Anodized aluminum body, NBR seals.With G 1/8" threads. Part no.: 01V P1 5 00 02Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Muffler 1/8 male MWSFE - ADAJUSA

Muffler 1/8 male MWSFE - ADAJUSA 2

Pneumatic silencers

SFE series 1/8 male Muffler

€0.71 (€0.59 tax excl.)

Pneumatic Muffler with 1/8" BSP male thread, made of brass, and stainless steel silencer element. They help reduce the level of noise produced by the air coming out of the cylinders and pneumatic valves. It also prevents dirt from entering the elements. tires.Reference: SFE 1/8 Representative image for illustrative purposes, the item supplied will...

Pneumatic cylinder diameter 25mm stroke 50 standard MF0250050 Aignep | ADAJUSA | price

Pneumatic Cylinders

Pneumatic cylinder 25x50 double acting MF0250050 - Aignep

€38.26 (€31.62 tax excl.)

Pneumatic cylinder Ø25 stroke 50mm, double magnetic effect. Manufactured in Italy according to ISO 6432 standard, prepared for magnetic detectors, chrome-plated steel stem. ATEX cylinders as standard.Reference: MF0250050 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Black selector with 2 short cam positions and Valve: 3/2 NC side fittings Ø 4 mm - Aignep - ADAJUSA

Black selector with 2 short cam positions and Valve: 3/2 NC side fittings Ø 4 mm - Aignep - ADAJUSA 2

Pack

Pushbuttons and pneumatic actuators

Black selector switch short cam 2 positions and Valve: 3/2 NC side fittings Ø 4 mm- Aignep

€36.22 (€29.93 tax excl.)

Pneumatic selector short cam 2 positions (0-1), and limit switch valve normally closed closed (NC), fittings located on the side for tube outer diameter of 4 mm with built-in adapter for the interface (push-button-valve). Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Limit switch pneumatic strut 3/2 NC monostable with side fittings diameter M5 - Aignep | ADAJUSA | price

Pneumatic Limit switchs

Limit switch 3/2 NC pneumatic strut 3/2 NC monostable with lateral fittings diameter M5...

€14.40 (€11.90 tax excl.)

Limit switch m5 pneumatic 3 way and 2 positions, fittings located on the side for M5 outside diameter tube. The type of limit switch valve is normally closed (NC). Series: 02VPart number: 02VG03NCB5 Representative image for illustrative purposes, the item supplied will correspond to the specifications shown.

Female fork M4x0,7 with 4x8 clip - ADAJUSA

Female fork M4x0,7 with 4x8 clip - ADAJUSA 2

Pack

Pneumatic cylinder accessories

Female fork M10x1,25 with clip 10x20 - for cylinder diameter 25 and 32

€3.98 (€3.29 tax excl.)

Female fork with M10x1.25 thread and clip. The fixings have a U-shaped design and two holes for inserting a pin. Its main application is joints and forks for pneumatic cylinder stems.Rod connection thread: M10 x 1.25 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Home

Product added to wishlist

Product added to compare.