Limit switch pneumatic roller 3/2 NC diameter 4...
Limit switch pneumatic roller 3/2 NC diameter 4...
Limit switch pneumatic roller 3/2 NC diameter 4 side fittings - Metal Work
Limit switch pneumatic roller 3/2 NC diameter 4 side fittings - Metal Work

Limit switch pneumatic roller 3/2 NC diameter 4 side fittings - Metal Work

€21.72 Tax included

€17.95 tax excl.

Limit Switch pneumatic with roller drive, fittings located on the side, for outer diameter tube of 4 mm. The valve type of the limit switch is normally closed (NC).

Reference: W3501001201

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
Privacy
Shipments
Returns
 

limit switch metal roller drive tire, with integrated quick-connect fittings for 4mm outer diameter tube. The state of the valve of the limit switch at rest is normally closed, that is, without pressing there is no presence of air in the exit, the air can not pass, when it is activated, it lets the air pass and there is pneumatic pressure at the outlet.

  • Manufacturer: Metal Work
  • Valve type: 3/2 Normally closed (NC).
  • Type of limit switch drive: Metal roller.
  • Manufacturer reference: W3501001201 - VME2-02 NC Ø 4
  • Reduced drive force.
  • Signal speed and pressure.
  • Mechanical drive.
  • Material type: metallic.
  • Fittings: fast for tube diameter 4mm side connection.
  • Installation: in any position.
  • Fluid: Compressed air filtered without lubrication; lubrication, if used, must be continuous.
  • Working pressure (bar): 0.5 ÷ 10
  • Working temperature (°C): -10° ÷ +60
  • Nominal diameter (mm) 2.5
  • Conductance C (Nl/min · bar): 16.5
  • Critical ratio b (bar/bar): 0.03
  • Capacity at 6 bar ΔP 0.5 bar (Nl/min): 35
  • Capacity at 6 bar ΔP 1 bar (Nl/min): 60
  • Strut drive force at 6 bar (N): 8
  • Lubricant recommended: ISO and UNI FD22

Final de carrera neumatico rodillo nc salida lateral con racores

Material for professional use, install in compliance with the regulations in force at the place of installation.

To expand the information you can download the technical sheet by clicking on the "Attachments" tab

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

16 other products in the same category:

Limit switch 3/2 NC...
Pneumatic Limit switchs

Limit switch 3/2 NC pneumatic strut 3/2 NC rear fittings 4 mm diameter - Aignep

Aignep
02VG03NCY1
€15.62 (€12.91 tax excl.)
Limit switch pneumatic strut with 3 way and 2 positions, monostable, normally closed (NC) and fittings located at the rear for tube outer diameter of 4 mm. Prepared for mounting with emergency push button or similar. Series: 02VPart no.: 02VG03NCY1 Representative image for illustrative purposes, the item supplied will correspond to the specifications...

Customers who bought this product also bought:

Male cylindrical adjustable...
Fittings swivel elbow

Male cylindrical adjustable elbow fitting 1/8 tube 4mm Series 55000 - Aignep

55116418
€1.56 (€1.29 tax excl.)
1/8 male cylindrical adjustable elbow fitting for 4mm tube with metal nut and gasket included, made of technopolymer and nickel-plated brass, the tube extraction ring in acetal resin. Very simple and effective connection that allows reconnection thousands of times without compromising perfect pneumatic and mechanical retention . Series: 55000 Reference:...
Home
Product added to wishlist
Product added to compare.