Pendant emergency stop push Button box and 2 push buttons - SCHNEIDER

Pendant Box equipped with emergency stop button and up and down buttons providing movement in 2 speeds (low and high) for each movement. Pendant station fully prepared for use in the control of two-speed motors. It consists of two mechanically interlocked buttons and a 30 mm diameter slow stop emergency button with interlocking and unlocking by turning.


Enclosure made of yellow polypropylene with 8…26 mm rubber-tipped cable entry; it is highly resistant to impacts, dust, water and vibrations thanks to its IP65 protection rating. The box is composed of an internal mounting plate, a protective cable sheath, an internal cable clamp , a suspension ring and a cable flange (to tighten the sheath onto the cable). Its design makes it not only simple and intuitive to operate, but also very comfortable and ergonomic for the operator to use. In compliance with the safety requirements of IEC standards.

The supply includes:

• Box of 3 elements in yellow
• Emergency push button with 30mm diameter and interlocking , 1 NC
• White push button, 1NC + 2NA slow-fast
• Black push button, 1NC + 2NA slow-fast

Characteristics:

• Manufacturer: SCHNEIDER
• Reference: XACA2913
• HARMONY XAC SERIES
• Product Type: Pendant Control Station
• Number of drills: 3
• Surrounding material: Double insulation polypropylene
• Cable entry: Rubber handle with 8…26mm graduated entry
• Vertical operator cutting centers: 30mm
• Short circuit protection: 10A gG type cartridge fuse
• Conventional thermal current: 10A
• Rated insulation voltage: 600V
• Surge voltage resistance: 6kV
• Contact designation: 3A at 240V, AC-15 / 1.2A at 600V, AC-15 / 0.27A at 250V, DC-13 / 0.1A at 600V, DC-13
• Contact operation: Slow break
• Protective treatment: TH
• Operating temperature: -40…70C
• Overvoltage category: Class II according to IEC 61140
• IP protection class: IP65 according to IEC 60529
• IK protection class: IK08
• Mechanical durability: 1000000 cycles
• Weight: 0.57kg
• Regulations: CSA C22.2 No 14, EN/IEC 60947-5-1, EN/IEC 60204-32, UL 508

(1) For 2 and 3 pin XACA stations
(2) For 4 and 8 pin XACA stations
(3) With emergency stop triggering action performed with the head operator
(4) Inner diameter

For further information, you can download the technical sheet by clicking on the "Attached Files" tab.

Professional use material, it must be installed by qualified personnel in compliance with the regulations in force at the place of installation.