1/4 3/2-way "L" valve with pneumatic rotary actuator
1/4 3/2-way "L" valve with pneumatic rotary actuator
1/4 3/2-way "L" valve with pneumatic rotary actuator
1/4 3/2-way "L" valve with pneumatic rotary actuator
1/4 3/2-way "L" valve with pneumatic rotary actuator
1/4 3/2-way "L" valve with pneumatic rotary actuator

Stainless steel T-valve 1 3/2-way with pneumatic rotary actuator - Metal Work

€310.29 Tax included

€256.44 tax excl.

1" valve in stainless steel dial, 3 ways 2 positions, 3/2, with configuration in "T", with double effect pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve made of stainless steel.

The valve has a manual activation control.

Valves with ATEX certification.

Reference: VB3T2IA025050D

Simbolo neumatico actuador con valvula doble efectoPictograma ATEX

Logotipo metal work

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
Privacy
Shipments
Returns
 

Valve of 1" of sphere, 3 ways 2 positions, 3/2, made of stainless steel, with configuration of the valve in "T", with pneumatic rotary actuator of double effect. For control of air, water, gases or non-corrosive and non-flammable fluids.

On the pneumatic actuator there is a control to be able to act the valve manually.

The configuration of the valve is in "T", in one position, the valve allows the passage from 1 to 2 or 1 to 1 remaining the 3 closed; in the other position, the passage is allowed between all the tracks.

Valves with ATEX certification.

Diagrama válvula en T de 3 Vías

Specifications:

  • Assembly Manufacturer: Metal Work
  • Manufacturer reference: VB3T2IA025050D
  • Actuator type: Ø50 double pneumatic effect.
  • Valve type: 3 ways 2 positions (3/2).
  • Valve configuration: in "T".
  • Thread Type: G 1" Female
  • Valve body: AISI 316 stainless steel
  • Dial: Stainless steel AISI 316
  • Joints: PTFE.
  • Nominal pressure PN: 40 bar
  • Standard: ISO 5211 (direct mounting to the actuator)
  • Temperature: -20ºC to +80ºC
  1. Dimensiones actuadores neumaticos con valvulas 3 vías

Dimensiones valvulas con actuador neumático de 3 vías

Esquema montaje válvula 3 vías en L con actuador

Material for professional use, install in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

L-valve 1 3/2-way with pneumatic rotary actuator - Metal Work

Metal Work
VB3L2LB025050
€315.42 (€260.68 tax excl.)
1" dial valve, 3 ways 2 positions, 3/2, with "L" configuration, with double effect pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2LB025050D / W0900300125 Representative...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

T-way valve 1 3/2-way with pneumatic rotary actuator - Metal Work

Metal Work
VB3T2LB025050
€315.42 (€260.68 tax excl.)
1" dial valve, 3-way 2-position, 3/2, with "T" configuration, with double-acting pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3T2LB025050D / W0900300135 Representative image...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve 1 3/2 way stainless steel L-shaped with actuator pneumatic rotary - Metal Work

Metal Work
VB3L2IA025050
€357.22 (€295.22 tax excl.)
Stainless steel 1" ball valve, 3 way 2 positions, 3/2, "L" configuration, with double acting pneumatic rotary actuator. For control of air, water, gases or non-corrosive and non-flammable fluids. Stainless steel valve body. The valve has a manual activation control. Valves with ATEX certification. Part number: Z33VB3L2IA025050D/ W0900300084...

16 other products in the same category:

Rotary Actuator .63 Rotary Actuator .63 2
Valves with pneumatic actuators

Rotary actuator diameter 63 - Metal Work

Metal Work
AD063GQ014DA
€147.35 (€121.78 tax excl.)
Double-acting Ø63 pneumatic rotary actuator, for actuating ball, butterfly, or any other type of valve, with a 90º turning angle. The actuator can be easily coupled to valves complying with ISO 5211 - DIN3337 regulations. NAMUR standard valves and solenoid valves can be fixed to the actuator for its operation. Reference: W79AD063GQ014DA   Representative...
Angled seat valve 1 NC...
Valves with pneumatic actuators

Angled seat valve 1 NC actuator in INOX diameter 63 - Aignep

Aignep
X1Y0910630
€194.22 (€160.51 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1" thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is manufactured in AISI 304 stainless steel and is pneumatically actuated. The valve can be installed in any mounting position, the body manufactured in the shape of a...
1/4 2/2-way valve with pneumatic rotary actuator 1/4 2/2-way valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve 1 1/4 2/2 ways stainless steel with pneumatic rotary actuator - Metal Work

Metal Work
VB22IA032063D
€249.95 (€206.57 tax excl.)
Stainless steel valve with 1 1/4" dial, 2-way 2-position, 2/2, with double-acting pneumatic rotary actuator. For control of air, water, gases or non-corrosive and non-flammable fluids. Valve body in stainless steel. The valve has a manual activation control. Valves with ATEX certification. Reference: VB22IA032063D Representative image for...
Angled seat valve 1 1/2 NC...
Valves with pneumatic actuators

Angled seat valve 1 1/2 NC actuator in technopolymer - Aignep

Aignep
X2YXG10800
€246.01 (€203.31 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1 1/2 thread. PTFE gaskets which allow it to work in a wide range of fluid temperatures (-10ºC to +180ºC). The actuator body is made of technopolymer and is pneumatically actuated. The valve can be installed in any mounting position, the "Y" shaped body increases flow by 30% and increases the...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

L-valve 1 3/2-way with pneumatic rotary actuator - Metal Work

Metal Work
VB3L2LB025050
€315.42 (€260.68 tax excl.)
1" dial valve, 3 ways 2 positions, 3/2, with "L" configuration, with double effect pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2LB025050D / W0900300125 Representative...
Angled seat valve 2 NC...
Valves with pneumatic actuators

Angled seat valve 2 NC actuator in INOX diameter 90 - Aignep

Aignep
X1YXH10900
€392.74 (€324.58 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 2" thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is manufactured in AISI 304 stainless steel and is pneumatically actuated. The valve can be installed in any mounting position, the body manufactured in the shape of a...
Angled seat valve 1 1/2 NC...
Valves with pneumatic actuators

Angled seat valve 1 1/2 NC actuator in INOX diameter 63 - Aignep

Aignep
X1YXG10630
€263.27 (€217.58 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1" 1/2 thread. PTFE gaskets which allow it to work in a wide range of fluid temperatures (-10ºC to +180ºC). The actuator body It is made of AISI 304 stainless steel and is pneumatically actuated. The valve can be installed in any mounting position, the body manufactured in the shape of a "Y"...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

Valve 1/4 3/2 T-way with pneumatic rotary actuator - Metal Work

Metal Work
VB3T2LB008032
€186.07 (€153.78 tax excl.)
Valve1/4" dial , 3-way 2-position, 3/2, with "T" configuration, with double-acting pneumatic rotary actuator. For control of air, gases or non-corrosive and non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3T2LB008032D / W0900300131 Representative...
1/4 3/2-way "L" valve with pneumatic rotary actuator 1/4 3/2-way "L" valve with pneumatic rotary actuator 2
Valves with pneumatic actuators

3/4 3/2- way L-shaped valve with pneumatic rotary actuator - Metal Work

Metal Work
VB3L2LB020050
€259.98 (€214.86 tax excl.)
3/4" ball valve, 3 way 2-position, 3/2, with "L" configuration, with double-acting pneumatic rotary actuator . For control of air, gases or non-corrosive or non-flammable fluids. Valve body in nickel-plated brass. The valve has a manual activation control. Valves with ATEX certification. Reference: VB3L2LB020050D / W0900300124 Representative image for...
Compact valve for fluids 1...
Valves with pneumatic actuators

Compact valve for fluids 1 NC with pneumatic actuator Fluxa series - Aignep

Aignep
51100
€84.74 (€70.03 tax excl.)
Compact seat valve, with simple acting pneumatic actuator , 40mm diameter, and normally closed (NC), with 1" thread. FKM joints. The actuator body is made of anodized aluminum alloy and is pneumatically actuated. The valve is made in brass.Reference: 51100 Representative image for illustrative purposes, the item supplied will correspond to the indicated...
Angled seat valve 1/2 NC...
Valves with pneumatic actuators

Angled seat valve 1/2 NC actuator in technopolymer diameter 50 - Aignep

Aignep
X2Y0510500
€91.50 (€75.62 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1/2 thread. PTFE gaskets which allow it to work in a wide range of temperatures in the fluid (-10ºC to +180ºC). The actuator body is made of technopolymer and is pneumatically actuated. The valve can be installed in any mounting position, the "Y" shaped body increases flow by 30% and increases...
Angled seat valve 1 1/4 NC...
Valves with pneumatic actuators

Angled seat valve 1 1/4 NC actuator in INOX diameter 63 - Aignep

Aignep
X1YXF10630
€250.32 (€206.88 tax excl.)
Normally closed (NC) simple acting inclined seat valve with 1" 1/4 thread. PTFE gaskets which allow it to work in a wide range of fluid temperatures (-10ºC to +180ºC). The actuator body It is made of AISI 304 stainless steel and is pneumatically actuated. The valve can be installed in any mounting position, the body manufactured in the shape of a "Y"...
Compact valve for fluids 1...
Valves with pneumatic actuators

Compact valve for fluids 1 1/2 NC with pneumatic actuator Fluxa series - Aignep

Aignep
51112
€142.49 (€117.76 tax excl.)
Compact seat valve, with simple acting pneumatic actuator , 60mm diameter, and normally closed (NC), with 1" 1/2 thread. FKM gaskets. The actuator body is made of anodized aluminum alloy and is pneumatically actuated. The valve is made of brass. Reference: 51112 Representative image for illustrative purposes, the item supplied will correspond to the...
Home
Product added to wishlist
Product added to compare.