• Pack
Emergency stop button with locking and valve:...
Emergency stop button with locking and valve:...
Emergency stop button with locking and valve:...
Emergency stop button with locking and valve: 3/2 NO side fittings Ø 4 mm- Aignep
Emergency stop button with locking and valve: 3/2 NO side fittings Ø 4 mm- Aignep
Emergency stop button with locking and valve: 3/2 NO side fittings Ø 4 mm- Aignep

Emergency stop button with locking and valve: 3/2 NO side fittings Ø 4 mm- Aignep

€44.17 Tax included

€36.50 tax excl.

40 mm diameter pneumatic emergency stop push button with adapter for valve and normally open (NO) end-of-stroke valve, fittings on the side for 4 mm outer diameter tube with built-in adapter for the interface (push button-valve).

seta emergencia + final de carrera NO RL

Logotipo AignepNORMATIVAMICROVALVULA
Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

This pack contains

No queries yet, leave the first!
Privacy
Shipments
Returns
 

Emergency pushbutton for use with pneumatic limit switch valves with pushbutton actuation

Limit switch pneumatic actuated by metal strut, with integrated quick-connect fittings on the side for 4mm external pipe diameter. The valve is normally open (NO), i.e. when not pressed there is air at the outlet, air can flow through and when actuated the air stops flowing and the air in the outlet circuit communicates with the exhaust.

The scope of supply includes:

    • Push button body
    • Valve adapter (supplied with the pushbutton)
    • Limit switch valve NO with fittings on the side Ø 4 mm and adapter integrated in the valve.

Valve characteristics:


  • Manufacturer: Aignep
  • Valve type: 3/2 Normally closed closed (NC).
  • Type of limit switch actuation: metal strut.
  • Manufacturer's part number: 02VD03NOX1
  • Valve body: anodized aluminum
  • Spring material: stainless steel
  • Seals: NBR
  • Fittings: quick couplings for pipe diameter 4 mm side connection.
  • Operating pressure: 2 ÷ 10
  • Operating temperature °C: -10 ÷ +60
  • Flow rate at 6 bar ΔP 1 bar Nl/min: 100
  • Built-in adapter for interface (push-button-valve).
  • Installation: in any position.
With the valve adapter up to two valves can be installed at the same time. Only one type of valve is included in the scope of delivery. If desired, another valve can be purchased separately to be added to the push button



dimensionesmicrovalvula
setamonoestableaxial 


Material for professional use, install in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

16 other products in the same category:

Pneumatic foot pedal 1/4...
Pushbuttons and pneumatic actuators

Pneumatic foot pedal 1/4 5/2 monostable with protection and safety mechanism - Aignep

Aignep
06V0000002
€64.92 (€53.65 tax excl.)
Pneumatic pedal with thread 1/4" of 5 way with mechanical locking for the actuation and with protection cover, in high resistance plastic material, of operation monostable, the pneumatic valve is actuated while the pedal remains pressed returning to the rest position when it stops being actuated.Reference: 06V0000002 (PC 1/4 PI) Representative image...
Pneumatic pedal 1/4 5/2 monostable with locking and protection Metal Work - ADAJUSA Pneumatic pedal 1/4 5/2 monostable with locking and protection Metal Work - ADAJUSA 2
Pushbuttons and pneumatic actuators

Single-stable 1/4 5/2 pneumatic pedal with locking and protection - Metal Work

Metal Work
W3120000021
€86.49 (€71.48 tax excl.)
Pneumatic pedal with 1/4" 5-way thread with mechanical lock and with protective cover in high-strength plastic material, monostable operation, the pneumatic valve is operated while the pedal remains pressed returning to the resting position when it stops operating.Reference: W3120000021 Representative image for illustrative purposes, the item...
Pneumatic foot pedal 1/4...
  • New
Pushbuttons and pneumatic actuators

Pneumatic foot pedal 1/4 5/2 bistable without protection cover - Aignep

Aignep
06V0000006
€63.42 (€52.41 tax excl.)
Pneumatic pedal with thread 1/4" of 5 way without protection cover in plastic material of high resistance, of operation bistable, the pneumatic valve is activated in the first pulsation and will remain activated even if the foot is withdrawn, it will remain activated until a new actuation with the foot. Part number: 06V0000006 Representative image...

Customers who bought this product also bought:

Pressure switch 1/8 no with protective head - ADAJUSA
  • Pack
Vacuum switches, pressure switches and flowmeters

Pressure switch 1/8 open contact with protection head

PK-PRESNA
€21.05 (€17.40 tax excl.)
1/8 pneumatic pressure switch with open contact, adjustable pressure range between 1 and 10 bar . With protection cover that provides an IP54 protection degree. This pressure switch allows a pneumatic signal to be converted into an electrical signal. When the set pressure is reached, the contact switches to the closed position. Representative image for...
Home
Product added to wishlist
Product added to compare.