• Pack
2-wire magnetic reed sensor with cable - adajusa.es
Tensioner clamp for cylinders diameter 16 - Metal Work - adajusa.es
Magnetic sensor reed 2 wires with cable and clamp carriers diameter 25 - Metal Work - adajusa.es
2-wire magnetic reed sensor with cable - adajusa.es
Tensioner clamp for cylinders diameter 16 - Metal Work - adajusa.es
Magnetic sensor reed 2 wires with cable and clamp carriers diameter 25 - Metal Work - adajusa.es

Magnetic sensor reed 2 wires cable and clamp 25 - Metal Work

€22.74 Tax included

€18.79 tax excl.

Magnetic sensor with cable included 2 wires (reed) and fixing support for cylinders Ø25 (ISO 6432).

Logotipo Metal Work
Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

This pack contains

No queries yet, leave the first!
 

Magnetic detector with cable included and clamp for pneumatic cylinders of diameter 25 (ISO 6432).

Shipping includes:

  • Magnetic sensor reed of 2 wires with cable. Reference: W0952022180
  • Sensor clamp for cylinders Ø25. Reference: W0950000625

Magnetic sensor with cable included for mounting on pneumatic cylinders. Type reed 2 threads.

This sensor has the characteristic of being able to be mounted in the cylinder slot from above, that is, the cylinder head does not need a through opening.

It is fixed by a qaue screw pressed against the bottom of the T-slot, the fixing screw is for a 1.5mm allen wrench. The sensor can be installed in any cylinder or component with traditional T-slots.

Characteristics of the magnetic detector:

  • Manufacturer: Metal Work.
  • Contact type: Reed NO (Normally open).
  • Supply voltage (Ub): 10 ÷ 30 Vac/dc.
  • Power (W): 3.
  • Peak power (W): 6.
  • Output current (mA): ≤ 100.
  • Switching frequency (Hz): ≤ 400.
  • Short circuit protection: NO.
  • Over-load protection: NO.
  • Regulations: EC, EN60947-5-2
  • Color led status indicator: Yellow.
  • Magnetic sensitivity: 2.8mT±25%.
  • Frequency: ≤ 0.1mT.
  • Degree of protection (according to EN60529): IP67.
  • Working temperature (ºC): -25÷70.
  • Sensor capsule material: PA66 + PA61/6T.
  • Connection cable length: 2.5 m.
  • Type of connection cable: PVC; 2x0,12mm².
  • Number of drivers: 2.
  • measurement
    Length 34 mm.
    Width 7 mm.
    Height 4 mm.

Other models: consult.

Dimensiones sensor ovalado Metal work

Diagrama de cableado sensor metal work tipo reed

Detector magnético Metal Work



Material for professional use, install respecting the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

16 other products in the same category:

Customers who bought this product also bought:

Reviews
Product added to wishlist
Product added to compare.