Pressure switch 1/8 nc - ADAJUSA
Pressure switch 1/8 nc - ADAJUSA
Pressure switch 1/8 nc - ADAJUSA
Pressure switch 1/8 nc - ADAJUSA
Pressure switch 1/8 nc - ADAJUSA
Pressure switch 1/8 nc - ADAJUSA
Pressure switch 1/8 nc - ADAJUSA
Pressure switch 1/8 nc - ADAJUSA

Pressure switch 1/8 contact closed

€16.65 Tax included

13.76 tax excl.

4121122

Pressure switch 1/8 tire with nc, adjustable pressure range between 1 and 10 bar.

Reference: 4121122

Esquema eléctrico presostato contacto cerrado NC



Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.



1 question about the product
Privacy
Shipments
Returns
 

1/8 contact cylindrical male screw pressure switch, normally closed (NC). The pressure level is adjustable between 1 and 10 bar. The main application of this pressure switch is the detection of the lack of pneumatic pressure at the pressure switch inlet. The electrical contact will remain closed until the adjusted pneumatic pressure is reached, at this time it will open.

The electrical connection terminals are by means of faston type terminals.

Specifications:

  • Brand: Vestonn
  • Reference: 4121122
  • Thread: 1/8
  • Contact type: 4A. NC (normally closed), resistive load.
  • Maximum working voltage: 250 Vac.
  • Working temperature: -5ºC to 80ºC.
  • Adjustable pressure range: 1 - 10 bar.
  • Maximum pressure: 10 bar.
  • Body material: OT58 brass.
  • Membrane material: FKM.
  • Piston material: OT58 brass.
  • Fixed contact: Silver.
  • Mobile contact: Phosphorous bronze, with silver tablet.

Other models: consult.

Dimensiones presostato neumático metal work

Dimensiones presostato neumático metal work 2

Material for professional use, install in compliance with the regulations in force at the place of installation.

Questions

Question
Buenas tardes, busco presostatos con características que he visto en su pagina. Pero sería importante que en la hoja técnica viniese homologado para uso con gas GLP's
Answer
Estimado cliente,

Los presostatos que tenemos a la venta no tienen hoja técnica viniese homologado para uso con gas GLP's

Un saludo
ADAJUSA
Francisco Ruiz on 05/14/2025 18:50:25

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

Pneumatic pressure switch 1/8 open contact Metal Work Z334111122 NA | ADAJUSA | price Pneumatic pressure switch 1/8 open contact Metal Work Z334111122 NA | ADAJUSA | price 2
Pressure switches, vacuum switches and flowmeters

Pressure switch 1/8 open contact - Metal Work

Metal Work
4111122
€16.65 (€13.76 tax excl.)
1/8 pneumatic pressure switch with open contact, adjustable pressure range between 1 and 10 bar . This pressure switch allows a pneumatic signal to be converted into an electrical signal. When the set pressure is reached, the contact switches to the closed position. Reference: 4111122 Representative image for illustrative purposes, the item supplied will...

16 other products in the same category:

Centering tool for 40mm tube drill Aignep | ADAJUSA | price
Flanges and branches for downpipes for compressed air installations

Centering tool for 40mm tube drill - Aignep

Aignep
9024240
€38.73 (€32.01 tax excl.)
Tool or centering element for drilling holes in a 40mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange of the 90240 and 90246 series from the Aignep brand. Reference: 90242 40...
Centering tool for 32mm tube drill Aignep | ADAJUSA | price
Flanges and branches for downpipes for compressed air installations

Centering tool for 32mm tube drill - Aignep

Aignep
9024932
€35.30 (€29.17 tax excl.)
Tool or centering element for drilling holes in a 32mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange for the 90247 series of the Aignep brand. Reference: 90249 32...
Centering tool for 63mm tube drill Aignep | ADAJUSA | price
Flanges and branches for downpipes for compressed air installations

Centering tool for 63mm tube drill - Aignep

Aignep
9024263
€52.48 (€43.37 tax excl.)
Tool or centering element for drilling holes in a 63mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange of the 90240 and 90246 series from the Aignep brand. Reference: 90242 63...
Centering tool for 25mm tube drill Aignep | ADAJUSA | price
Flanges and branches for downpipes for compressed air installations

Centering tool for 25mm tube drill - Aignep

Aignep
9024925
€34.82 (€28.78 tax excl.)
Tool or centering element for drilling holes in a 25mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange for the 90247 series of the Aignep brand. Reference: 90249 25...
Centering tool for 63mm tube drill Aignep | ADAJUSA | price
Flanges and branches for downpipes for compressed air installations

Centering tool for 63mm tube drill - Aignep

Aignep
9024963
€52.99 (€43.79 tax excl.)
Tool or centering element for drilling holes in a 63mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange for the 90247 series of the Aignep brand. Reference: 90249 63...
Centering tool for 50mm tube drill Aignep | ADAJUSA | price
Flanges and branches for downpipes for compressed air installations

Centering tool for 50mm tube drill - Aignep

Aignep
9024250
€49.66 (€41.04 tax excl.)
Tool or centering element for drilling holes in a 50mm outer diameter tube. This element allows the correct drilling of the tube to be carried out quickly, easily and centered on the desired point of the tube, for the subsequent placement of a flange for downspout or bypass flange of the 90240 and 90246 series from the Aignep brand. Reference: 90242 50...

Customers who bought this product also bought:

40mm plastic emergency push button NYG3-ETR | ADAJUSA | price
Stop and emergency pushbuttons

40mm emergency push button with twist release - NY Series

TRACON
NYG3-ETR
€6.70 (€5.54 tax excl.)
40mm diameter emergency pushbutton with twist interlocking and release, closed contact (NC) . Mushroom-shaped pushbutton made of plastic, mounting hole diameter 22 mm. Intended for mounting on machinery control panels and control boxes in general. It offers high protection on the front side, IP65. The supply includes the complete pushbutton with one...
Home
Product added to wishlist
Product added to compare.