List of products by supplier Generico-ROD

Classic C series trapeze straps

Classic V-belt C 270 6858mm - DAYCO

Classic V-belt type of profile "C" 22x14mm, with an internal development length of Li-6858mm, for power transmission in industrial machinery, agricultural machinery and gardening applications. Careful design and manufacturing, which provides low stretching, wear and are lubricant resistant. Ref: C270DR. Interior development length: 6858mm.

SPZ 75x1 v-belt Pulley with T1108 taper - ADAJUSA

SPZ 75x1 v-belt Pulley with T1108 taper - ADAJUSA 2

Pack

V-belt pulleys complete with taper

V-belt pulley 118mm 1 slot for shaft diameter 24mm type SPB

PLSPB1181T1610-24

€47.60 (€39.34 tax excl.)

Pulley for V-belts Ø118mm, from 1 slot, with taper lock with 24mm shaft diameter and keyway. Valid for all V-belts with "V" profile type A and SPA. Manufactured according to ISO4183 - DIN2211 Type of belts: "V" profile type A and SPA Pulley diameter (Dp): 118mm Number of slots for belts: 1 Taper: center shaft diameter 24mm with 8mm key...

Foot support with cast bearings

Bearing bracket shaft 95mm UCP319 - SNR

UCP319-SNR

€455.44 (€376.40 tax excl.)

Casting bracket with UCP319 inserted bearing for 95mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: SNR Reference: UCP319...

Classic C series trapeze straps

Classic V-belt C 276 7010mm - DAYCO

97R-C276DR

€82.06 (€67.82 tax excl.)

Classic V-belt type of profile "C" 22x14mm, with an internal development length of Li-7010mm, for power transmission in industrial machinery, agricultural machinery and gardening applications. Careful design and manufacturing, which provides low stretching, wear and are lubricant resistant. Ref: C276DR. Interior development length: 7010mm.

View

Pack

V-belt pulleys complete with taper

V-belt pulley 118mm 1 slot for shaft diameter 28mm type SPB

PLSPB1181T1610-28

€47.60 (€39.34 tax excl.)

Pulley for V-belts Ø118mm, from 1 slot, with taper lock with 28mm shaft diameter and keyway. Valid for all V-belts with "V" profile type A and SPA. Manufactured according to ISO4183 - DIN2211 Type of belts: "V" profile type A and SPA Pulley diameter (Dp): 118mm Number of slots for belts: 1 Taper: center shaft diameter 28mm with 8mm key...

Toothed discs or simple jagged chains - ADAJUSA

Toothed discs or toothed crowns ISO DIN 606 - DIN 8187 - ASA DIN 8188

Single discs or ring gears Z8 3/8 x 7/32 06B-1 ISO DIN 606

DISCZ806B1

€2.53 (€2.09 tax excl.)

Toothed discs or simple toothed chains Z8 for roller chain 3/8" 06B-1 according to European standard DIN ISO 606 Reference: DISC Z8 3/8 Teeth: 8 ISO: 06B-1 (3/8" - 7/32mm) Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Foot support with cast bearings

Bearing bracket shaft 100mm UCP320 - SNR

UCP320-SNR

€543.76 (€449.39 tax excl.)

Casting bracket with UCP320 inserted bearing for 100mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: SNR Reference: UCP320...

Classic C series trapeze straps

Classic V-belt C 280 7112mm - DAYCO

97R-C280DR

€82.93 (€68.54 tax excl.)

Classic V-belt type of profile "C" 22x14mm, with an internal development length of Li-7112mm, for power transmission in industrial machinery, agricultural machinery and gardening applications. Careful design and manufacturing, which provides low stretching, wear and are lubricant resistant. Ref: C280DR. Interior development length: 7112mm.

View

Pack

V-belt pulleys complete with taper

V-belt pulley 118mm 1 slot for shaft diameter 38mm type SPB

PLSPB1181T1610-38

€47.60 (€39.34 tax excl.)

Pulley for V-belts Ø118mm, from 1 slot, with taper lock with 38mm shaft diameter and keyway. Valid for all V-belts with "V" profile type A and SPA. Manufactured according to ISO4183 - DIN2211 Type of belts: "V" profile type A and SPA Pulley diameter (Dp): 118mm Number of slots for belts: 1 Taper: center shaft diameter of 38mm with 10mm key...

Toothed discs or toothed crowns ISO DIN 606 - DIN 8187 - ASA DIN 8188

Single discs or ring gears Z9 3/8 x 7/32 06B-1 ISO DIN 606

DISCZ906B1

€2.53 (€2.09 tax excl.)

Toothed discs or simple toothed chains Z9 for roller chain 3/8" 06B-1 according to European standard DIN ISO 606 Reference: DISCO Z9 3/8 Teeth: 9 ISO: 06B-1 (3/8" - 7/32mm) Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Foot support with cast bearings

Shaft bearing holder 110mm UCP322 - SNR

UCP322-SNR

€735.40 (€607.77 tax excl.)

Casting bracket with UCP322 inserted bearing for 110mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: SNR Reference: UCP322...

Classic C series trapeze straps

Classic V-belt C 285 7239mm - DAYCO

97R-C285DR

€83.96 (€69.39 tax excl.)

Classic V-belt type of profile "C" 22x14mm, with an internal development length of Li-7239mm, for power transmission in industrial machinery, agricultural machinery and gardening applications. Careful design and manufacturing, which provides low stretching, wear and are lubricant resistant. Ref: C285DR. Interior development length: 7239mm.

Pack

V-belt pulleys complete with taper

V-belt pulley 118mm 1 slot for shaft diameter 42mm type SPB

PLSPB1181T1610-42

€47.60 (€39.34 tax excl.)

Pulley for V-belts Ø118mm, from 1 slot, with taper lock with 42mm shaft diameter and keyway. Valid for all V-belts with "V" profile type A and SPA. Manufactured according to ISO4183 - DIN2211 Belt type: "V" profile type A and SPA Pulley diameter (Dp): 118mm Number of slots for belts: 1 Taper: center shaft diameter of 42mm with 12mm key Picture...

Jagged discs or simple serrated chains - ADAJUSA

Toothed discs or toothed crowns ISO DIN 606 - DIN 8187 - ASA DIN 8188

Simple toothed discs or crowns Z13 3/8 x 7/32 06B-1 ISO DIN 606

DISCZ1306B1

€3.69 (€3.05 tax excl.)

Toothed discs or simple toothed chains Z13 for roller chain 3/8" 06B-1 according to European standard DIN ISO 606 Reference: DISCO Z13 3/8 Teeth: 13 ISO: 06B-1 (3/8" - 7/32mm) Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Foot support with cast bearings

Bearing bracket shaft 120mm UCP324 - SNR

UCP324-SNR

€1,008.91 (€833.81 tax excl.)

Casting bracket with UCP324 inserted bearing for 120mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: SNR Reference: UCP324...

Classic C series trapeze straps

Classic V-belt C 295 7493mm - DAYCO

97R-C295DR

€85.99 (€71.07 tax excl.)

Classic V-belt type of profile "C" 22x14mm, with an internal development length of Li-7493mm, for power transmission in industrial machinery, agricultural machinery and gardening applications. Careful design and manufacturing, which provides low stretching, wear and are lubricant resistant. Ref: C295DR. Interior development length: 7493mm.

View

Pack

V-belt pulleys complete with taper

V-belt pulley 125mm 1 slot for shaft diameter 14mm type SPB

PLSPB1251T1610-14

€49.96 (€41.29 tax excl.)

Pulley for V-belts Ø125mm, from 1 slot, with taper lock with 14mm shaft diameter and keyway. Valid for all V-belts with "V" profile type A and SPA. Manufactured according to ISO4183 - DIN2211 Type of belts: "V" profile type A and SPA Pulley diameter (Dp): 125mm Number of slots for belts: 1 Taper: center shaft diameter 14mm with 5mm key...

Toothed discs or toothed crowns ISO DIN 606 - DIN 8187 - ASA DIN 8188

Single discs or ring gears Z14 3/8 x 7/32 06B-1 ISO DIN 606

DISCZ1406B1

€3.69 (€3.05 tax excl.)

Toothed discs or simple toothed chains Z14 for roller chain 3/8" 06B-1 according to European standard DIN ISO 606 Reference: DISCO Z14 3/8 Teeth: 14 ISO: 06B-1 (3/8" - 7/32mm) Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Foot support with cast bearings

Bearing bracket shaft 130mm UCP326 - SNR

UCP326-SNR

€1,335.14 (€1,103.42 tax excl.)

Casting bracket with UCP326 inserted bearing for 130mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: SNR Reference: UCP326...

Classic C series trapeze straps

Classic V-belt C 297 7544mm - DAYCO

97R-C297DR

€86.39 (€71.40 tax excl.)

Classic V-belt type of profile "C" 22x14mm, with an internal development length of Li-7544mm, for power transmission in industrial machinery, agricultural machinery and gardening applications. Careful design and manufacturing, which provides low stretching, wear and are lubricant resistant. Ref: C297DR. Interior development length: 7544mm.

View

Pack

V-belt pulleys complete with taper

V-belt pulley 125mm 1 slot for shaft diameter 19mm type SPB

PLSPB1251T1610-19

€49.96 (€41.29 tax excl.)

Pulley for V-belts Ø125mm, from 1 slot, with taper lock with 19mm shaft diameter and keyway. Valid for all V-belts with "V" profile type A and SPA. Manufactured according to ISO4183 - DIN2211 Type of belts: "V" profile type A and SPA Pulley diameter (Dp): 125mm Number of slots for belts: 1 Taper: center shaft diameter 19mm with 6mm key...

Toothed discs or toothed crowns ISO DIN 606 - DIN 8187 - ASA DIN 8188

Simple toothed discs or crowns Z16 3/8 x 7/32 06B-1 ISO DIN 606

DISCZ1606B1

€3.69 (€3.05 tax excl.)

Toothed discs or simple toothed chains Z16 for roller chain 3/8" 06B-1 according to European standard DIN ISO 606 Reference: DISCO Z16 3/8 Teeth: 16 ISO: 06B-1 (3/8" - 7/32mm) Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Foot support with cast bearings

Bearing bracket shaft 140mm UCP328 - SNR

UCP328-SNR

€1,604.33 (€1,325.89 tax excl.)

Casting bracket with UCP328 inserted bearing for 140mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Manufacturer: SNR Reference: UCP328...

Classic C series trapeze straps

Classic V-belt C 300 7620mm - DAYCO

97R-C300DR

€86.99 (€71.89 tax excl.)

Classic V-belt type of profile "C" 22x14mm, with an internal development length of Li-7620mm, for power transmission in industrial machinery, agricultural machinery and gardening applications. Careful design and manufacturing, which provides low stretching, wear and are lubricant resistant. Ref: C300DR. Interior development length: 7620mm.

View

Pack

V-belt pulleys complete with taper

V-belt pulley 125mm 1 slot for shaft diameter 24mm type SPB

PLSPB1251T1610-24

€49.96 (€41.29 tax excl.)

Pulley for V-belts Ø125mm, from 1 slot, with taper lock with 24mm shaft diameter and keyway. Valid for all V-belts with "V" profile type A and SPA. Manufactured according to ISO4183 - DIN2211 Type of belts: "V" profile type A and SPA Pulley diameter (Dp): 125mm Number of slots for belts: 1 Taper: center shaft diameter 24mm with 8mm key...

Toothed discs or toothed crowns ISO DIN 606 - DIN 8187 - ASA DIN 8188

Single discs or ring gears Z17 3/8 x 7/32 06B-1 ISO DIN 606

DISCZ1706B1

€3.69 (€3.05 tax excl.)

Toothed discs or simple toothed chains Z17 for roller chain 3/8" 06B-1 according to European standard DIN ISO 606 Reference: DISC Z17 3/8 Teeth: 17 ISO: 06B-1 (3/8" - 7/32mm) Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Foot support with cast bearings

Bracket with shaft bearing 20mm RASEY - INA

RASEY20-XL-N

€31.86 (€26.33 tax excl.)

RasEY inserted bearing casting bracket for 20mm diameter shaft, support bracket in self-aligning grey cast iron support with ball bearing inserted, with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber, type R. Manufacturer: INA - Schaeffler Reference: RASEY20-XL-N Representative image for illustrative purposes, the item...

View

Classic C series trapeze straps

Classic C 303 7696mm Trapecial Strap - DAYCO

97R-C303DR

€87.60 (€72.40 tax excl.)

Classic V-belt type of profile "C" 22x14mm, with an internal development length of Li-7696mm, for power transmission in industrial machinery, agricultural machinery and gardening applications. Careful design and manufacturing, which provides low stretching, wear and are lubricant resistant. Ref: C303DR. Interior development length: 7696mm.

View

Pack

V-belt pulleys complete with taper

V-belt pulley 125mm 1 slot for shaft diameter 28mm type SPB

PLSPB1251T1610-28

€49.96 (€41.29 tax excl.)

Pulley for V-belts Ø125mm, from 1 slot, with taper lock with 28mm shaft diameter and keyway. Valid for all V-belts with "V" profile type A and SPA. Manufactured according to ISO4183 - DIN2211 Type of belts: "V" profile type A and SPA Pulley diameter (Dp): 125mm Number of slots for belts: 1 Taper: 28mm center shaft diameter with 8mm key...

Toothed discs or toothed crowns ISO DIN 606 - DIN 8187 - ASA DIN 8188

Simple toothed discs or crowns Z19 3/8 x 7/32 06B-1 ISO DIN 606

DISCZ1906B1

€4.22 (€3.49 tax excl.)

Toothed discs or simple toothed chains Z19 for roller chain 3/8" 06B-1 according to European standard DIN ISO 606 Reference: DISCO Z19 3/8 Teeth: 19 ISO: 06B-1 (3/8" - 7/32mm) Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Foot support with cast bearings

Bracket with shaft bearing 25mm RASEY - INA

RASEY25-XL-N

€35.70 (€29.50 tax excl.)

RasEY inserted bearing casting bracket for 25mm diameter shaft, support bracket in self-aligning grey cast iron support with ball bearing inserted, with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber, type R. Manufacturer: INA - Schaeffler Reference: RASEY25-XL-N Representative image for illustrative purposes, the item...

Classic C series trapeze straps

Classic V-belt C 314 7976mm - DAYCO

97R-C314DR

€89.75 (€74.17 tax excl.)

Classic V-belt type of profile "C" 22x14mm, with an internal development length of Li-7976mm, for power transmission in industrial machinery, agricultural machinery and gardening applications. Careful design and manufacturing, which provides low stretching, wear and are lubricant resistant. Ref: C314DR. Interior development length: 7976mm.

View

Pack

V-belt pulleys complete with taper

V-belt pulley 125mm 1 slot for shaft diameter 38mm type SPB

PLSPB1251T1610-38

€49.96 (€41.29 tax excl.)

Pulley for V-belts Ø125mm, from 1 slot, with taper lock with 38mm shaft diameter and keyway. Valid for all V-belts with "V" profile type A and SPA. Manufactured according to ISO4183 - DIN2211 Type of belts: "V" profile type A and SPA Pulley diameter (Dp): 125mm Number of slots for belts: 1 Taper: 38mm center shaft diameter with 10mm keyway...

Toothed discs or toothed crowns ISO DIN 606 - DIN 8187 - ASA DIN 8188

Single discs or ring gears Z21 3/8 x 7/32 06B-1 ISO DIN 606

DISCZ2106B1

€5.81 (€4.80 tax excl.)

Toothed discs or simple toothed chains Z21 for roller chain 3/8" 06B-1 according to European standard DIN ISO 606 Reference: DISC Z21 3/8 Teeth: 21 ISO: 06B-1 (3/8" - 7/32mm) Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Foot support with cast bearings

Support with shaft bearing 30mm RASEY - INA

RASEY30-XL-N

€42.99 (€35.53 tax excl.)

RasEY inserted bearing casting bracket for 30mm diameter shaft, support bracket in self-aligning grey casting support with ball bearing inserted, with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber, type R. Manufacturer: INA - Schaeffler Reference: RASEY30-XL-N Representative image for illustrative purposes, the item...

Classic C series trapeze straps

Classic V-belt C 315 8001mm - DAYCO

97R-C315DR

€89.93 (€74.32 tax excl.)

Classic V-belt type of profile "C" 22x14mm, with an internal development length of Li-8001mm, for power transmission in industrial machinery, agricultural machinery and gardening applications. Careful design and manufacturing, which provides low stretching, wear and are lubricant resistant. Ref: C315DR.Interior development length: 8001mm.

View

Showing 5005-5040 of 6862 item(s)

Client support

ADAJUSA

C/ Mercurio, 7 28970 Humanes de (Spain)

+34 911354650 +34 912973850

From Monday to Thursday from 8:30 to 13:30 and 15:30 a 18:30. Friday from 8:30 to 13:30

Send a message

Your Account

Create customer account
Create Business Account

Follow us in our social

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information Customize cookies

Functional cookies

Yes

Description and cookies

Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.


PHP_SESSID	adajusa.es	The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser.	Session
PrestaShop-#	adajusa.es	This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop.	480 hours
rc::a	Google	It is used to read and filter bot requests.	Persistent
rc::c	Google	It is used to read and filter bot requests.	Persistent

Advertising Cookies

Yes

Description and cookies

These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.


ads/ga-audiences	Google	These cookies are used by Google AdWords to re-engage visitors that are likely to convert to customers based on the visitor’s online behaviour across websites.	Session

Analytics cookies

Yes

Description and cookies

Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.


_ga	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	2 years
_gat	Google	Used by Google Analytics to throttle request rate	1 day
_gat_gtag_UA_#	Google	Used to throttle request rate.	1 minute
_gd#	Google	This is a Google Analytics Session cookie used to generate statistical data on how you use the website which is removed when you quit your browser.	Session
_gid	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	1 day

Performance cookies

Yes

Description

These are used to improve the browsing experience and optimize the operation of the shop.

Other cookies

Yes

Description

These are cookies without a clear purpose or those that we are still in the process of classifying.

List of products by supplier Generico-ROD

Client support

Company information

Your Account

Follow us in our social