Cap 9mm to 11mm drive shaft or reducer adapter

Name: Cap 9mm to 11mm drive shaft or reducer adapter
Brand: Especial-MOT
SKU: CAS-9/11
Price: 7.2842 EUR
Availability: InStock

€7.28 Tax included

€6.02 tax excl.

Cap 9/11 adapter for motor or gearbox shaft, inner diameter 9mm and outer diameter 11mm. Made of steel, this adapter bushing allows to increase the diameter of a motor shaft to adapt it to the input of a gearbox or any other application.

Reference: 9/11

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!

Privacy

Shipments

Returns

Description
Frequently questions

Cap adapter with inner diameter 9mm and outer diameter 11mm. Allows to adapt the output shaft of a motor to the input shaft of a gearbox or any other type of application.

Made of ground steel.
The supply includes the key for the bushing.

Technical specifications

Part number: 9/11
Material: Steel
Finish: ground
Inside diameter: 9mm
Outside diameter: 11mm
Key: included

Material for professional use, must be installed in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

16 other products in the same category:

Tensioning guides for electric motors

Tensioning rails for electric motor size 80-90 rail length 312 mm

Generico-MOT

LMGT312/8

€62.71 (€51.83 tax excl.)

Tensioning rails for electric motors with housing sizes 80 and 90. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 312mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks . Reference: LMGT312/8Representative image for illustrative...

Tensioning guides for electric motors

Tensioning rails for electric motor size 100-112 rail length 375 mm

Generico-MOT

LMGT375/10

€68.52 (€56.63 tax excl.)

Tensioning rails for electric motors with housing sizes 100 and 112. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 375mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Part number: LMGT375/10Representative image for...

Gearbox accessories

FC output flange for size 50 reducer

Generico-MOT

FC-50

€13.93 (€11.51 tax excl.)

FC-50 type output flange for size 50 worm gear reducers. This flange allows for lateral coupling in a very simple and compact way. Reference: FC-50 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Gearbox accessories

FA output flange for gearbox size 63

Generico-MOT

FA-63

€11.31 (€9.35 tax excl.)

Output flange type FA-63 for wormgearboxes size 63. This flange allows a lateral coupling in a very compact way simple. Part No.: FA-63Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Gearbox accessories

FB output flange for reducer size 50

Generico-MOT

FB-50

€11.31 (€9.35 tax excl.)

Output flange type FB-50 for worm gearboxes size 50. This flange allows a lateral coupling in a very compact way simple. Part No.: FB-50Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Gearbox accessories

FD output flange for size 40 reducer

Generico-MOT

FD-40

€9.57 (€7.91 tax excl.)

FD-40 type output flange for size 40 worm gear reducers. This flange allows for lateral coupling in a very simple and compact way. Reference: FD-40 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Gearbox accessories

FB output flange for gearbox size 63

Generico-MOT

FB-63

€13.93 (€11.51 tax excl.)

Output flange type FB-63 for worm gearboxes size 63. This flange allows a lateral coupling in a very compact way simple. Part No.: FB-63Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Gearbox accessories

FA output flange for reducer size 50

Generico-MOT

FA-50

€9.57 (€7.91 tax excl.)

Output flange type FA-50 for wormgearboxes size 50. This flange allows a lateral coupling in a very compact way simple. Part No.: FA-50Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Gearbox accessories

PAM flange for worm gear reducer size 90

Generico-MOT

PAM-90xxxx

€20.91 (€17.28 tax excl.)

PAM flange for size 90 worm gear reducer. This flange is made of aluminum. These flanges are available to couple motors with either a B5 or B14 flange . Available flange sizes are: Size 80 (diameter 200) B5 Size 80 (diameter 120) B14 Size 90 (diameter 200) B5 Size 90 (diameter 140) B14 Size 100/112 (diameter 250) B5 Size 100/112 (diameter 160) B14 Select...

Gearbox accessories

PAM flange for worm gear reducer size 25

Generico-MOT

PAM-25xxxx

€11.62 (€9.60 tax excl.)

PAM flange for size 25 worm gear reducer. This flange is made of aluminum. These flanges are available to couple motors with either a B5 or B14 flange . Available flange sizes are: Size 56 (diameter 120) B5 Size 56 (diameter 80) B14 Select the type of flange from the menu. Representative image for illustrative purposes, the item supplied will correspond...

Tensioning guides for electric motors

Tensioning rails for electric motor size 132 rail length 630 mm

Generico-MOT

LMGT630/10

€182.33 (€150.69 tax excl.)

Tensioning rails for electric motors with housing size 132. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 630mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Reference: LMGT630/10Representative image for illustrative...

Gearbox accessories

FD output flange for size 90 reducer

Generico-MOT

FD-90

€29.96 (€24.76 tax excl.)

FD-90 type output flange for size 90 worm gear reducers. This flange allows for lateral coupling in a very simple and compact way. Reference: FD-90 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Bases tensoras para motores eléctricos

Tensioning base for electric motor size 90 to 112

Generico-MOT

LMBTSMA307

€46.31 (€38.27 tax excl.)

Tensioning base for electric motors with housing sizes between 90 and 112. Allows adjustment and regulation of belt tensioning and alignment without disassembling the motor. Adjustable plate displacement by means of standard screw. Part No.: LMBTSMA307Representative image for illustrative purposes, the item supplied will correspond to the specifications...

Gearbox accessories

Cap 19mm to 24mm drive shaft or gearbox adapter

Especial-MOT

CAS-19/24

€11.62 (€9.60 tax excl.)

Cap 19/24 adapter for motor or gearbox shaft, inner diameter 19mm and outer diameter 24mm. Made of steel, this adapter bushing allows to increase the diameter of a motor shaft to adapt it to the input of a gearbox or any other application.Reference: 19/24Representative image for illustrative purposes, the item supplied will correspond to the...

Tensioning guides for electric motors

Tensioning rails for electric motor size 160-180 rail length 630mm

Generico-MOT

LMGT630/12

€182.33 (€150.69 tax excl.)

Tensioning rails for electric motors with housing sizes 160 and 180. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 495mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Reference: LMGT630/12Representative image for...

Gearbox accessories

Double output shaft T-63 diameter 25mm

Generico-MOT

93EDT-63-25

€13.10 (€10.83 tax excl.)

Double output shaft type T-63, Ø25mm., for size 63 worm gear reducers. Made of ground steel. Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Customers who bought this product also bought:

Full 20A star-triangle switch - Giovenzana adajusa

Pack

Inverter switches, star-delta

Star-triangle switch 20A (7.5hp) - Giovenzana

GICO2000-15R

€30.73 (€25.40 tax excl.)

Star-triangle starter switch 20A electric motors. It allows the start and stop of a three-phase electric motor in star-triangle mode, to reduce the initial consumption tip during start-up. Engine power 7.5hp (5.5Kw) with voltage 400Vac. Reference: GICO2000-15R Representative image for illustrative purposes, the article supplied will correspond to the...

Gearbox accessories

Cap 19mm to 24mm drive shaft or gearbox adapter

Especial-MOT

CAS-19/24

€11.62 (€9.60 tax excl.)

Endless crown reducers

Worm Reducer Size 40 PAM 90/11 flange - Motor casing 63 B14

9R040xxx63B14

€77.83 (€64.32 tax excl.)

With Ø18mm hollow output shaft, and PAM 90/11 input flange (Ext Ø 90mm and input shaft Ø 11mm) type B14, suitable for motors with frame size 63. Available reduction ratios: 7.5-10-15-20-25-30-40-50-60-80. The powers of the usual engines at 1500 rpm are: 0.12hp 0.16hp 0.25CV Reduced casing. Max. grid. i=60. Representative image for...

Gearbox accessories

Cap adapter for motor shaft or reducer from 14mm to 19mm

CAS-14/19

€9.98 (€8.25 tax excl.)

Cap 14/19 adapter for motor or gearbox shaft, inner diameter 14mm and outer diameter 19mm. Made of steel, this adapter bushing allows to increase the diameter of a motor shaft to adapt it to the input of a gearbox or any other application.Reference: 14/19 Representative image for illustrative purposes, the item supplied will correspond to the...

Gearbox accessories

Simple axis of output T-25 11

93EST-25-11

€7.24 (€5.98 tax excl.)

Simple shaft of output type T-25 of Ø11mm., for reducers worm gear crown size 25. Made of rectified steel. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

LS15GW2-B - Long roller lever limit switch (Microswitch) Adajusa

LS15GW2-B - Long roller lever limit switch (Microswitch) Adajusa 2

Electric Race Finals (Microswitches)

Limit switch long roller lever (microswitch microswitch) LS15 Series

LS15GW2-B

€5.02 (€4.15 tax excl.)

Long lever actuated limit switch with roller, (microswitch microswitch), 1 CO (NO/NC). High load capacity. Part No.: LS15GW2-B Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Gearbox accessories

FA output flange for reducer size 50

Generico-MOT

FA-50

€9.57 (€7.91 tax excl.)

Deep groove ball roller

Bearing 6000-2RS FAG 10x26x8mm

6000-2RS

€3.33 (€2.75 tax excl.)

Ball bearing 6000-2RS dimensions 10x26x8mm. Rigid ball bearing of a row made of steel, sealed with two caps in elastic material (2RS) . Reference: 6000-2RS Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Gearbox accessories

FA output flange for reducer size 40

FA-40

€8.72 (€7.21 tax excl.)

Output flange type FA-40 for wormgearboxes size 40. This flange allows a lateral coupling in a very compact way simple. Part number: FA-40Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Gearbox accessories

PAM flange for worm gear reducer size 50

PAM-50xxxx

€17.52 (€14.48 tax excl.)

PAM flange for size 50 worm gear reducer. This flange is made of aluminum. These flanges are available to couple motors with either a B5 or B14 flange . Available flange sizes are: Size 63 (diameter 140) B5 Size 63 (diameter 90) B14 Size 71 (diameter 160) B5 Size 71 (diameter 105) B14 Size 80 (diameter 200) B5 Size 80 (diameter 120) B14 Select the type of...

Home

Client support

ADAJUSA

C/ Mercurio, 7 28970 Humanes de (Spain)

+34 911354650 +34 912973850

From Monday to Thursday from 8:30 to 13:30 and 15:30 a 18:30. Friday from 8:30 to 13:30

Send a message

Your Account

Create customer account
Create Business Account

Follow us in our social

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information Customize cookies

Functional cookies

Yes

Description and cookies

Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.


PHP_SESSID	adajusa.es	The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser.	Session
PrestaShop-#	adajusa.es	This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop.	480 hours
rc::a	Google	It is used to read and filter bot requests.	Persistent
rc::c	Google	It is used to read and filter bot requests.	Persistent

Advertising Cookies

Yes

Description and cookies

These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.


ads/ga-audiences	Google	These cookies are used by Google AdWords to re-engage visitors that are likely to convert to customers based on the visitor’s online behaviour across websites.	Session

Analytics cookies

Yes

Description and cookies

Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.


_ga	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	2 years
_gat	Google	Used by Google Analytics to throttle request rate	1 day
_gat_gtag_UA_#	Google	Used to throttle request rate.	1 minute
_gd#	Google	This is a Google Analytics Session cookie used to generate statistical data on how you use the website which is removed when you quit your browser.	Session
_gid	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	1 day

Performance cookies

Yes

Description

These are used to improve the browsing experience and optimize the operation of the shop.

Other cookies

Yes

Description

These are cookies without a clear purpose or those that we are still in the process of classifying.

Cap 9mm to 11mm drive shaft or reducer adapter

Questions

Question about the product

16 other products in the same category:

Customers who bought this product also bought:

Client support

Company information

Your Account

Follow us in our social