Pressure switch 3/8" Syntesi Metal Work - ADAJUSA
Pressure switch 3/8" Syntesi Metal Work - ADAJUSA

Pressure switch Size 2 3/8 2m cable Syntesi - Metal Work

€72.47 Tax included

€59.89 tax excl.

3/8" size 2 pressure switch, presents a high degree of miniaturization. It is a device whose function is to open or close circuits depending on the adjusted pressure.

Reference: 5623S103

syntesi pressure switch diagrammetal work logo

Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

No queries yet, leave the first!
Privacy
Shipments
Returns
 

3/8" size 2 pressure switch, it has a high degree of miniaturization. They are ready assembled with a 2 m cable or with an M8 connector with a 300mm cable. The contact is of the switch type, so they can be normally open or closed. They can be regulated by means of a knurled push-lock knob.

Characteristic:
  • Manufacturer: Metal Work
  • Reference: 5623S103
  • Discharge threaded coupling: 3/8"
  • Maximum current / maximum voltage: 2A / 250V
  • Cable outer diameter: 4.9mm
  • Number and section of wires: 3 x 0.5mm²
  • Contacts: normally open (NO) and normally closed (NC)
  • Protection: IP65
  • pressure max. admitted:
      • bar : 13
      • MPa: 1.3
      • psi: 188
  • Flow rate of additional air intakes 6.3 bar (0.63 MPa; 91 psi) ΔP 1 bar (0.1 MPa; 14 psi): Nl/min 1500 - scfm 53
  • temperature at 10 bar ; 1MPa; 145psi°: -10÷+50
  • Fluid: Filtered air with or without lubrication, if lubrication is used it must be continuous.
  • Mounting position: In any position
  • Supplementary air intake, for pressure gauge or fitting: 1/4”, front and rear
  • Wall fixing screws: Number 2 M5 screws



Material for professional use, install in compliance with the regulations in force at the place of installation.

For more information, you can download the technical sheet by clicking on the "Annexes" tab.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

Pressure gauge 50 1/8 0-12 Kgr plastic box
Gauges and measurement elements

Manometer 50 1/8 0-12 bar back plastic box - Metal Work

Metal Work
MWMP5318012
€6.06 (€5.01 tax excl.)
Pressure gauge Ø50 with plastic case. Pressure gauge to control the pressure of the machine to be used. Black plastic case and rear connection with G thread 1/8". The internal mechanisms are made of brass and bronze. With metal dial, graduation in bar and psi. Steel needle. Reference: Z33MP5318012 Representative image for illustrative purposes, the...
Metal filter group (Filter + Lubricator) Metal Work - ADAJUSA
FR + LUB New deal

Pneumatic filter group 1/2 regulation 0-8 bar semi-automatic purge New Deal series -...

Metal Work
1426030
€117.70 (€97.27 tax excl.)
1/2 filter group, 1/2 maintenance unit for pneumatic applications, semi-automatic drain, compact size in 2 modules (FR+L) and regulation range 0-8 kg/cm2. Filtering unit with 20 μm filter. These groups are made of aluminum and plastic tanks with metal protection. European made material. Series: New DealReference: 1426030 Representative image for...

16 other products in the same category:

Filter 3/8 20 micron...
Filter groups of 3/8 FR-L

Filter 3/8 20 micron semi-automatic purge size 1 FRL EVO series - Aignep

Aignep
Y010104201000
€26.91 (€22.24 tax excl.)
3/8 filter, with a filtration degree of 20μm and semi-automatic discharge, size 1, for retention of solid or liquid impurities from the air compressor .These filter cups are made of technopolymer with metal endings. Made in Italy. Series: FRL Evo Part number: Y010104201000  Representative image for illustrative purposes, the item supplied will...
Pneumatic filter-regulator...
Filter groups of 3/8 FR-L

Pneumatic filter-regulator 3/8 0-8 bar automatic purge size 2 FRL EVO series - Aignep

Aignep
Y030204232000
€83.47 (€68.98 tax excl.)
Filter with 3/8 pneumatic pressure regulator, 3/8 maintenance unit for pneumatic applications, automatic purge, compact size (T2) and regulation range 0-8 bar, filtration degree of 20 μm. These filtering groups are manufactured in technopolymer and with metal endings. Made in Italy.Series: FRL Evo Reference: Y030204232000 Representative image for...
Regulator pressure with... Regulator pressure with... 2
  • Pack
Filter groups of 3/8 FR-L

Regulator pressure with pressure gauge and lockable 3/8 0-8 bar complete size 2 FRL EVO...

Aignep
PK-Y020204030000
€46.08 (€38.08 tax excl.)
Regulator with integrated 3/8 fullpressure gauge , with regulation between 0-8 bar, size 2, technopolymer body and metal endings, extreme reliability. Allows stability of the outlet pressure at the preset pressure. Possibility of fixing by means of lateral holes. Padlocking system. Made in Italy. Series: FRL Evo Reference: PK-Y02020204030000...
Pneumatic filtering group... Pneumatic filtering group... 2
Filter groups of 3/8 FR-L

Pneumatic filtering group 3/8 regulation 0-8 bar automatic purge size 2 FRL EVO series...

Aignep
Y100204232100
€124.76 (€103.11 tax excl.)
3/8 filtering group, 3/8 maintenance unit for pneumatic applications, automatic drain, compact size (T2) in 2 modules (FR+L), and regulation range 0-8 bar, compact pressure gauge. These filtering groups are manufactured in technopolymer and with metallic terminations. Made in Italy.Series: FRL EvoReference: Y100204232100 Representative image for...
Regulator pressure with...
Filter groups of 3/8 FR-L

Regulator pressure with pressure gauge and lockable 3/8 0-12 bar size 1 FRL EVO series...

Aignep
Y020104040000
€36.80 (€30.41 tax excl.)
Regulator 3/8" pressure gauge with integrated pressure gauge, range 0-12 bar, size 1, technopolymer body with metal endings. Allows stability of the outlet pressure at the preset pressure. Possibility of fixing by means of lateral holes. Padlocking system. Made in Italy. Series: FRL EvoPart number: Y020104040000   Representative image for...
Filter + Lubricator T1 RA Syntesi - Metal Work - ADAJUSA
FR + LUB Syntesi

Pneumatic filtration group 3/8 regulation 0-12 bar automatic drain Syntesi series -...

Metal Work
5613B56L103
€97.84 (€80.86 tax excl.)
3/8 filter group, 3/8 maintenance unit for pneumatic applications, automatic drain, compact size (SY1) in 2 modules (FR+L) and regulation range 0-12 kg/cm2. These filter groups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing.Series: SynthesisReference: 5613B56L103 Representative image...
Valve + Filter + Lubricator T2 Syntesi - Metal Work - ADAJUSA
Filter groups of 3/8 FR-L

Filter group 3/8 with shut-off valve regulation 0-12 bar semi-automatic drain Syntesi...

Metal Work
5623V10B26L3
€155.12 (€128.20 tax excl.)
3/8 filter group with manual shut-off valve , 3/8 maintenance unit for pneumatic applications, semi-automatic drain, compact size (SY2) and regulation range 0-12 kg/cm2. Equipped with manual cut-off valve at the inlet. These filter groups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing....
Pressure gauge for 63mm panel with stand - Metal Work - ADAJUSA Pressure gauge for 63mm panel with stand - Metal Work - ADAJUSA 2
  • Pack
Gauges and measurement elements

Pressure gauge for panel 63mm 1/4 0-12 bar with stand - Metal Work

Metal Work
PK-MAN6320G4G12SOP
€15.54 (€12.84 tax excl.)
Pressure gauge diameter 63mm with stainless steel case filled with glycerin, pressure indication between 0 and 12 bar. Pressure gauge to control the pressure of installations, systems or machines. Stainless steel case with rear connection with G 1/4" thread. The internal mechanisms are made of copper alloy. With metal dial, graduation in bar. Steel...
Grupo filtrante metálico (Filtro-regulador+Lubricador) Metal Work - ADAJUSA Grupo filtrante metálico (Filtro-regulador+Lubricador) Metal Work - ADAJUSA 2
Filter groups 3/8

Pneumatic filter group 3/8 regulation 0-12 bar semi-automatic purge New Deal series -...

Metal Work
1326054
€117.70 (€97.27 tax excl.)
3/8 filter group, 3/8 maintenance unit for pneumatic applications, semi-automatic drain, compact size in 2 modules (FR+L) and regulation range 0-12 kg/cm2. Filtering unit with 20 μm filter. These groups are made of aluminum and plastic tanks with metal protection. European made material.Series: New DealReference: 1326054 Representative image for...
Filter 3/4 20 RMSA Size 1 Syntesi Metal Work - ADAJUSA
Filter groups of 3/8 FR-L

Filter 3/8 20 microns semi-automatic drain size 1 Syntesi series - Metal Work

Metal Work
5613F203
€25.81 (€21.33 tax excl.)
3/8 filter, with a filtration degree of 20μm and semi-automatic discharge, size 1, for retention of solid or liquid impurities from the air compressor. These filter cups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing.Series: SynthesisReference: 5613F203Representative image for...
Filter + Regulator + Lubricator New Deal - Metal Work - ADAJUSA
Filter groups 3/8

Pneumatic filter group 3/8 regulation 0-12 bar semi-automatic purge New Deal series -...

Metal Work
1324054
€138.87 (€114.77 tax excl.)
3/8 filter group, 3/8 maintenance unit for pneumatic applications, semi-automatic drain, in 3 modules (F+R+L) and regulation range 0-12 kg/cm2. Filtering unit with 20 μm filter. These groups are made of aluminum and plastic tanks with metal protection. European made material.Series: New DealReference: 1324054 Representative image for illustrative...
Home
Product added to wishlist
Product added to compare.