Clamp or collar for fastening 32mm diameter aluminum pipe in distribution networks, made of steel with internal rubber coating to protect the pipe surface and avoid damaging it. Quick and easy fixing to walls, ceilings, partition walls, beams... both horizontally and vertically, depending on the desired configuration of the distribution network. The clamp has a simple screw mechanism for closing and gripping the pipe. Fixing by means of M8/M10 screw (not included in the supply)
This type of element has the function of supporting the pipe, a sufficient number of clamps must be fixed to guarantee the correct fastening of the pipe, these being an essential accessory to guarantee a good stability and fixation of the pipe network in the installations. It is recommended to install at least two clamps per pipe, in addition this type of fastening allows the phenomena of expansion and contraction due to the pressure of the fluid circulating inside the ducts to occur freely, and can also create a point said locking without allowing the slippage of the same.
Characteristics:
- Manufacturer: Aignep
- Part number: 90820 32
- Series: Infinity
- Tube diameter: 32mm
- Material: Steel
- Fixing: M8/M10 screw
- Application: Compressed air, vacuum, inert gas
Material for professional use, install in compliance with the regulations in force at the place of installation.
English 
Español
Português PT
Français
Italiano
Deutsch
