Regulator 1kVA (800V) single-phase automatic voltage regulator (AVR) to control the input mains voltage within regulation margins, providing a constant output voltage to supply any load with a clean, stable and safe voltage. It has 4 Schuko sockets to supply up to 4 equipments or loads simultaneously (without exceeding the maximum power between them) and a digital voltmeter for easy reading of input and output voltages.
Automatic regulation of the mains voltage, allowing ±25% input variations, stabilizes the output voltage within ±5 - 8% to supply any critical load with a fully controlled and stabilized voltage by providing a constant voltage.
Microprocessor-based electronic control provides protection against overvoltage and mains voltage spikes without distorting the output waveform. The automatic control circuit detects the input voltage and sets a compensated output voltage through an autotransformer with several taps. When the input mains is not stable, this circuit takes a sample and compares this value with preset values, sending a signal to the electronic control which decides the output tap voltage by changing the compensation voltage and obtaining a fully stabilized output voltage.
The equipment incorporates a Bypass output (unstabilized output) to supply non-critical loads that do not need a stable voltage. Its MTBF (mean time between failures) is over 60,000 hours.
Compact and lightweight high performance equipment suitable for powering home or small business computer equipment, audio/video and TV equipment, surveillance cameras, refrigerators and freezers, vending machines, personal radio stations, etc.
General features:
- Microprocessor-controlled automatic voltage regulation
- Protection against various mains problems including power surges and sags, short circuits, etc
- Digital voltmeter reading of input and output voltage
- Start selector (delayed/non-delayed)
- RJ45 connection for telephone, fax, modem, internet protection
Technical specifications:
- Manufacturer/Supplier: Aline
- Part number: PR-1000
- Power: 1kVA (800W)
- Input voltage range: Single phase 135Vac -280Vac
- Output voltage range: Single phase 230Vac ± 5%
- Frequency: 50Hz
- Power factor: 0.8
- AC-AC efficiency: > 90%
- Control type: Fully electronic
- Output waveform: Pure sine wave and zero distortion
- Protections: Surge, overvoltage, high/low voltage, short circuit
- Noise level
- Working temperature: -5º ~ +60ºC
- Dimensions: 305x175x125mm
- Weight: 1.8Kg
Note: The power in Watts has been calculated based on an installation with a power factor of 0.8. For installations with a power factor lower than 0.8 the power in Watts will always be lower than the indicated and will have to be recalculated.
For further information, you can download the technical data sheet by clicking on the "Attachments" tab.
Material for professional use, it must be installed by qualified personnel in compliance with the regulations in force at the place of installation.