T" fitting for downpipes with condensate separation system, for 40mm external diameter pipe and downpipe with 1/2 cylindrical female thread. Body and nut made of nickel-plated brass, O-ring in NBR. This type of fitting has a patented anti-condensate design for the realization of downpipes in networks and installations of compressed air, vacuum and inert gases such as nitrogen and argon. Automatic or "Push In" type fitting for quick and easy assembly. Maximum working pressure 16 bar.
This type of condensate drain fitting is an alternative to the traditional gooseneck, it is a fast and economical solution. Its particular internal geometry allows its application and installation in both horizontal and vertical position.
The 20, 25, 32 and 40mm diameter fittings come pre-assembled with the nut fully tightened, so that it is only necessary to insert the tube to the bottom of the fitting for connection or automatic assembly
Characteristics:
- Manufacturer: Aignep
- Ordering Number: 90236 40 1/2
- Series: Infinity
- Pipe diameter: 40mm
- Downpipe thread: Female 1/2 (Gas cylindrical according to ISO 228)
- Fitting type: "T" shaped
- Material: Nickel plated brass
- Application: Compressed air, vacuum, inert gas (nitrogen, argon)
- Operating conditions pressure 0.99 - 16bar (according to directive 2014/68/EU)
- Temperature conditions of use: -20ºC to +80ºC (according to directive 2014/68/EU)
- All products in the Infinity range meet the requirements of the 2014/68/EU (Pressure Equipment Directive), ASME B31.1 and ASME 31.3 requirements and compliance with the Technical Standards and Safety Authority (TSSA), are non-flammable and flame retardant according to UNI EN 13501-1:2005 Class A2-d1-d0. The Infinity system does not introduce solid particles, water, moisture or oil and therefore does not contaminate the transported fluid (ISO 8573-1 standard)
Equipment for professional use, to be installed in compliance with the regulations in force at the place of installation.
English 
Español
Português PT
Français
Italiano
Deutsch
