T-fitting for condensate drain diameter 25mm downstream 20mm - Aignep

T" fitting for downpipes with condensate drain, for 25mm outside diameter pipe and 20mm downpipe diameter. Body and nut made of nickel-plated brass, O-ring in NBR. This type of fitting allows a simple and fast union of pipes in networks and installations of compressed air, vacuum and inert gases such as nitrogen and argon as it has a "Push In" system. It allows the total air flow avoiding pressure losses. Maximum working pressure 16 bar.


The 20, 25, 32 and 40mm diameter fittings come pre-assembled with the nut fully tightened, so that it is only necessary to insert the tube to the bottom of the fitting for connection or automatic assembly.

Characteristics:

• Manufacturer: Aignep
• Part number: 90259 25 20
• Series: Infinity
• Pipe diameter: 25mm
• Downpipe diameter: 20mm
• Fitting type: "T" shape
• Material: Nickel plated brass
• Application: Compressed air, vacuum, inert gas (nitrogen, argon)
• Operating conditions pressure 0,99 - 16bar (according to directive 2014/68/EU)
• Temperature conditions of use: -20ºC to +80ºC (according to directive 2014/68/EU)
• All products in the Infinity range meet the requirements of 2014/68/EU (Pressure Equipment Directive), ASME B31.1 and ASME 31.3 requirements and compliance with the Technical Standards and Safety Authority (TSSA), are non-flammable and flame retardant according to UNI EN 13501-1:2005 Class A2-d1-d0. The Infinity system does not introduce solid particles, water, moisture or oil and therefore does not contaminate the transported fluid (ISO 8573-1 standard)

Equipment for professional use, to be installed in compliance with the regulations in force at the place of installation.