Protector transient and permanent overvoltages IGA 2x63A 10kA - Hyundai Electric

€102.96 Tax included

€85.09 tax excl.

Module for protection against transient and permanent overvoltages (earth arrester) with built-in IGA 2x63A for single-phase installations.

Combined surge protection module provides protection against permanent overvoltages due to mains voltage increases and against transient overvoltages (lightning strikes or mains switching). IGA Breaking capacity 10kA.

Reference: ST-2P63

The module includes:

  • IGA 2x63A.
  • Permanent surge protector.
  • Transient overvoltage protector (ground arrester).


Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
 

Combined protection set against transient (earth arrester) and permanent overvoltages associated with a 2-pole switching device (IGA) with a breaking capacity of 10kA according to UNE EN60898, curve "C".

The function of this protection module is to disconnect the single-phase electrical system when it is subjected to a voltage greater than it should receive, on a continuous basis, and to derive to ground the transient overvoltages caused by lightning strikes or the switching of electrical distribution lines.

This device, very compact and simple to install, provides very high protection, both against transient or permanent overvoltages, as well as against line overvoltages, by incorporating an IGA (magnetothermic) with a breaking capacity of 10kA. It has a visual indicator of the cutting status.

The supply includes:

  • 2 Pole IGA (single phase): 2x63A.
  • Permanent surge protector.
  • Transient surge protector (ground arrester).

 

The entire assembly is supplied fully wired.

Neutral location on the right side, it is mandatory to respect the neutral position even if the IGA is 2-pole protected.

technical characteristics:

  • Manufacturer/Supplier: Hyundai Electric
  • Ref: ST-2P63
  • Nominal voltage (Un) 230VAC.
  • Nominal intensity of the magnetothermic : 63A.
  • number of protected poles: 2 (2x63A).
  • MCB breaking capacity : 10000kA (according to IEC/EN60898).
  • Firing curve: "C".
  • Permanent upper trip voltage: 265Vac.
  • Permanent overvoltage response time:
    • 275Vac: approx. 7s.
    • 300Vac: approx. 3s.
    • 350Vac: approx. 0.5s.
    • 400Vac: approx. 0.15s.
  • Nominal transient discharge intensity (In): 5kA.
  • Maximum transient discharge intensity (Imax): 15kA.
  • Protection voltage (Up): =
  • Device type (class): II.
  • Maximum cable section in terminals: 10 mm 2 (IGA) 6 mm 2 (module).
  • Number of modules occupied on DIN rail: 4.
  • Regulations: EN 60898 / EN 50550 / IEC 61643-11.
  • Marking: CE.

 

Note: The surge protection capability is highly dependent on the quality of the ground.

For further information you can download the technical sheet by clicking on the "Attached Files" tab.

Professional use material, install in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

16 other products in the same category:

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.