Solenoid valve fluids 3/4 2/2 closed indirect drive INOX joints FKM - ADAJUSA
Solenoid valve fluids 3/4 2/2 closed indirect drive INOX joints FKM - ADAJUSA

Solenoid valve fluids 3/4 2/2 closed indirect drive INOX FKM gaskets

€68.44 Tax included

€56.56 tax excl.

Solenoid valve for home automation, fluids or process control, thread 3/4" in INOX AISI 316. Indirect drive closed 2-way membrane solenoid valve (NC). Hole diameter 20 mm

Working pressure max. 13 bar. dif pressure. min. 0.5 bar.
FKM gaskets:

Temperature: -10o to +140oC
Fluid: Air, inert gas, water max 75o C, mineral oils, gasoline, fuel oil.

Coil and connector not included.
Manufacturer Aignep. Ref: RSP-20J

Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

No queries yet, leave the first!
 

3/4" 2-way, normally closed (NC) membrane solenoid valve for use with fluids, indirectly operated. Body: INOX AISI 316.

Hole diameter: 20 mm

The main hole of the valve body is opened by the effect of an imbalance between the upper and lower surfaces of the membrane, when the coil is not activated, there is pressure in the upper chamber of the membrane, while in the lower chamber there is only pressure in the main hole of the valve, keeping it closed. When we give tension to the coil, we move the moving core, opening the piloting hole and doing the fluid discharge from the upper chamber, the pressure difference at this time causes it to open the main hole.

In this type of solenoid valves there must be a small pressure difference between the inlet and the outlet for it to work properly.

Compatible coils for this type of solenoid valve are MA30 range (30mm) (Coil and connector not included)

specifications:

  • Manufacturer: Aignep
  • Reference: RSP-20J
  • Type of control: indirect drive.
  • Thread size: 3/4".
  • Number of tracks: 2.
  • Number of positions: 2.
  • Configuration: 2/2 closed (NC).
  • Body: INOX AISI 316.
  • Guide tube, nuclei and spring: Stainless steel.
  • Gasket type: FKM.
  • Fluid type: Pressure air, water (max. 75oC), mineral oils, diesel, oil.
  • Maximum pressure: 13 bar.
  • ISO size 228: 3/4".
  • Step in: 20.
  • Minimum pressure differential (P bar): 0.5 bar.
  • Maximum Pressure Differential (P bar): 13
  • Working temperature of the solenoid valve: -10oC to +80oC.
  • Fluid temperature: -10oC to +140oC.
  • Installation: Never with the coil down.


Material for professional use, install in compliance with the regulations in force at the place of installation.

To expand the information you can download the data sheet by clicking on the tab "Attachments"

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

16 other products in the same category:

Customers who bought this product also bought:

Reviews
Product added to wishlist
Product added to compare.