Water filter-regulator 1/4" BIT - Metal Work - ADAJUSA
Water filter-regulator 1/4" BIT - Metal Work - ADAJUSA

Water filter-regulator Series F 1/4 20 0-12 bar BIT - Metal Work

€49.02 Tax included

€40.51 tax excl.

1/4" water filter-regulator regulation 0-12, body in extremely reliable technopolymer. Possibility of fixing by means of lateral holes. Bit Group

Pressure gauge not included (can be ordered separately)

Reference: 5205111F

metal work logo



Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

No queries yet, leave the first!
Privacy
Shipments
Returns
 

1/4" 0-12 water filter-regulator , body made of high resistance technopolymer. If the pressure regulator works with incompressible fluids (water) and there is a leak from a valve , the pressure could increase to reach the required pressure. input and then reset with water consumption.Possibility of fixing through side holes.Padlock locking system.

The pressure should always be adjusted upwards.

The transparent bowl was designed to allow checking the condition of the filter cartridge.

It admits very diverse types of assembly, with the appropriate accessories.

Technical characteristics.

  • Manufacturer: Metal Work
  • Reference: 5205111F
  • Threaded connection size: 1/4".
  • Regulation range: 0-12 bar .
  • Filtering degree: 20 μm.
  • Maximum inlet pressure (MPa) ( bar ) (psi): 1.3 - 13 - 188
  • Flow rate at 6.3 bar (0.63 MPa, 91 psi) ∆P 1 bar (0.1 MPa, 14 psi) (Nl/min): 6
  • Flow rate at 6.3 bar (0.63 MPa, 91 psi) ∆P 1 bar (0.1 MPa, 14 psi) (scfm): 0.21
  • Fluid: Air, water and fluids compatible with the materials used.
  • temperature at 10 bar ; 1MPa; 145 psi ( °C): 10 ÷ +50
  • Mounting position: any position
  • Included: Full discharge step by zeroing inlet pressure and lockable knob.
  • Inlet pressure compensation: Included, through balanced valve

Mounting accessories not included.

Material for professional use, install in compliance with the regulations in force at the place of installation.

For more information, you can download the technical sheet by clicking on the "Annexes" tab.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

You might also like

Manometer 40 1/8 0-12 bar... Manometer 40 1/8 0-12 bar... 2
Gauges and measurement elements

Manometer 40 1/8 0-12 bar back plastic box - Metal Work

Metal Work
MWMP4318012
2 reviews
€6.06 (€5.01 tax excl.)
Pressure gauge diameter 40 with plastic case. Pressure gauge to control the pressure of the machine to be used. Black plastic case and rear connection with G thread 1/8". The internal mechanisms are made of brass and bronze. With metal dial, graduation in bar and psi. Steel needle.Reference: MP4318012 Representative image for illustrative purposes,...

5 other products in the same category:

Customers who bought this product also bought:

Filter-regulator 1/4 T1 Syntesi - Metal work - ADAJUSA
Syntesi regulator filter

Pneumatic filter-regulator 1/4 0-4 bar semi-automatic drain Syntesi series - Metal Work

5612B222
€43.00 (€35.54 tax excl.)
Filter with 1/4 pneumatic pressure regulator, 1/4 maintenance unit for pneumatic applications, semi-automatic drain, compact size (SY1) and regulation range 0-4 kg/cm2, filtration degree of 20 μm. These filter groups are made of technopolymer and nickel-plated brass with excellent resistance to corrosion. European manufacturing. Series: Synthesis...
Home
Reviews
Product added to wishlist
Product added to compare.