Transformer 63VA E:230/400V S:24V IP-00
Transformer 63VA E:230/400V S:24V IP-00

Transformer 40VA E:230V S:230V IP-00

€28.52 Tax included

€23.57 tax excl.

Single-phase isolation transformer for command, control and general uses, input voltage 230Vac and output voltage 230Vac. The transformer power is 40VA, protection degree IP00. Fixing by screws or DIN rail.

Reference: TA000403200

transformer symbol 230-230

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
 

Single-phase transformer, 230Vac input and 230Vac output, power 40VA. Varnished transformer, with IP-00 protection grade. The maximum intensity supplied is 0.17 A (apparent intensity).

The main application of this type of transformer is for command and control in industrial automation, and for general applications. They are intended to supply electrical devices where galvanic isolation between circuits is required. They are protected against humidity by resin impregnation.

These types of transformers are fully reversible.


The transformer can be fixed using screws or on a DIN rail. It must be fixed to the DIN rail using the accessory designed for this purpose, reference KITDINKF1.5. The accessory is not included in the supply and must be purchased separately.

Technical characteristics of the transformer:

  • Reference: TA000403200
  • Transformer type: Single-phase
  • Primary voltage: 230Vac
  • Secondary voltage: 230Vac
  • Nominal power: 40VA
  • Maximum intensity in the secondary (In): 0.17A
  • Frequency: 50/60 Hz
  • Dielectric strength between primary and secondary: 3500V
  • Dielectric strength between primary and ground: 3500V
  • Winding: copper wire, class H. Primary and secondary separated (galvanic separation)
  • Protection class: IP00
  • Protection class: I
  • Insulation class: Tª 40ºC/F
  • Connection: Screw-faston terminals
  • Weight: 0.85kg
  • Transformer encapsulation: Varnishing
  • Mounting: By screws or DIN rail fixing
  • Standard: EN-61558-2-4




The transformer is supplied without any type of overload protection; it is mandatory to install this to avoid overloading the transformer.

The power and intensity indicated are apparent, the active intensity provided by the transformer will depend on the power factor of the connected load.




Professional use material, install in compliance with the regulations in force at the installation site.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

16 other products in the same category:

Product added to wishlist
Product added to compare.