Spring-loaded locking nut for 10/8" diameter tube, compatible with 1000 series quick couplings, nickel-plated brass nut and AISI 304 stainless steel spring. The locking nut allows extremely safe connection of thermoplastic tubes for pneumatic and fluidic applications. Locking can be done manually or with a key.
It is very useful in a multitude of applications such as compressed air, pneumatic automation, industrial water circuits, inert gases, vapors, fluids, vacuum, etc. The pressure and temperature are determined based on the tube used, therefore these values are defined based on the characteristics of the tube itself.
Mounting:
Technical characteristics:
- Manufacturer: Aignep .
- Reference: 1710 10/8
- Tube diameter: 10/8
- Fluid and liquids: Compatible with the connection type
- Nut material: Nickel plated brass
- Spring material: Stainless steel AISI 304 - EN 1.4301
- Connection tubes: Material PA6, PA11, PA 12, Polyethylene, Polyurethane (*) , PTFE and FEP
- Specific measurements for polyurethane tube: 8/5 - 8/5.5, 12/9
- Thread regulations:
- Conical gas conforming to ISO 7.1, BS 21, DIN 2999
- Cylindrical gas conforming to ISO 228 Class A
- Metric according to ISO R/262.
(*) use of 90 to 98 Shore, for maximum performance 98 Shore A is recommended.
Dimensions:
For further information you can download the technical sheet by clicking on the "Attached Files" tab .
Professional use material, install in compliance with the regulations in force at the installation site.
English 
Español
Adajusa FRANCE
Adajusa PORTUGAL
Adajusa ITALY
