Mechanical speed drive size 63 (0.25CV)
Mechanical speed drive size 63 (0.25CV)
Mechanical speed drive size 63 (0.25CV)
Mechanical speed drive size 63 (0.25CV)
Mechanical speed drive size 63 (0.25CV)
Mechanical speed drive size 63 (0.25CV)

Mechanical speed drive size 63 (0.25HP)

€169.85 Tax included

€140.37 tax excl.

Mechanical speed drive with which you can vary the speed of the turn by means of the side manoeuvre steering wheel, to be coupled to motors with flange size B5 size 63. Drive output shaft 11 and flange of 140mm.

  • Regular engine (not included) 0.25HP 1400rpm
  • Maximum output speed: 950 rpm
  • Minimum output speed: 190 rpm

No queries yet, leave the first!
 

Mechanical speed reducer inverter,planetary discs, manually operated by manoeuvre steering wheel, to be coupled to motors with flange type B5 and size 63.

Mechanical motorvariators,manufactured with special advanced technology, which makes them specially adapted for work in the maintenance industry, ceramics, packaging, chemical, textile, food, boiling machine, automatic production and assembly lines, and in general, those where speed regulation is required.

Its main features are as follows:

  • Continuous adjustment field 1:5,3 made in the entire range with respect to the input speed.
  • Speed constant ±0.5% at maximum speed and ±1% at minimum.
  • Sense of non-existent rotation with concordant input and output.
  • Silent and uniform operation.
  • Good sizing to ensure long life even with continuous service and at full load.
  • Torque increase, up to twice the nominal at the minimum speed.
  • High starting torque.
  • High performance, approximately 84% at maximum speed.

Technical details:

  • Reducer size: 63.
  • Maximum output torque: 4Nm.
  • Minimum output torque: 2Nm.
  • Output shaft: 11mm.
  • Saida flange: 140mm
  • Input shaft: 11mm.
  • Input flange: 140mm.

Recommended engines:

Pot rev. entry rev. salt. Maxims rev. salt. Minimum
0.16CV 900 620 125
0.25CV 1400 950 190

Dimension Summary:

Dimensiones variadores mecánicos

  • A: 82.5mm.
  • E: 23mm.
  • D: 11mm.
  • N: 140mm.
  • O: 9mm.

It should be noted that this type of mechanical drives require maintenance, the amount of lubrication oil must be checked and that they cannot be regulated standing still, if regulation is attempted with the inverter stopped, there will be a mismatch of the planetarium system, you cannot work under these conditions, there will be excessive heating of the regulator and if this situation is maintained over time , a serious breakdown thereof. Please note that such incidents are not covered by the warranty.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

6 other products in the same category:

Customers who bought this product also bought:

Reviews
Product added to wishlist
Product added to compare.