Magnetothermic 1 Pole+Neutral 20A narrow profile - Tracon

Magnetothermic profile 1 pole + neutral 20A 4.5kA curve "C" circuit breaker, for protection against short circuits and overloads in single-phase or two-phase installations. With an assigned breaking capacity of 4.5kA with status indication. Protects the active conductor and cuts both conductors. Manufactured from fireproof thermoplastic material and in accordance with the reference standard EN 60898. High reliability and performance allowing a high number of work cycles.

Ideal for use in both domestic and industrial installations.

( * ) Devices with two poles have one protected (phase) and one switched (N) neutral pole.



As the main characteristics of this range of products we can highlight:

• Compact design and structure
• Two ways to connect cables and distribution combs
• Transparent protective cover for the protection of identification labels
• Visual status indication

Technical characteristics:

• Manufacturer/Supplier: Tracon
• Manufacturer reference: DPN-C-20
• Number of poles: Pole + Neutral (1 module)
• Rated current (In): 20A
• Breaking capacity (Icn): 4500A (4.5kA)
• Maximum operating voltage (Ue): 230Vac, 50/60Hz
• Nominal insulation voltage (Ui): 500Vac
• Rated impulse withstand voltage (Uimp): 4kV
• Characteristic curve: C
• Neutral location: Left side
• Electrical life: > 20000 cycles
• Mechanical life: > 6000 cycles
• Operating temperature: -25ºC...+55ºC
• Protection grade: IP20
• Conductor section: 1.5 - 10mm²
• Allows the use of pin-type connection combs
• Does not support the assembly of auxiliary elements
• Sealable in OFF position
• Regulations: EN 60898

Material for professional use, install in compliance with the regulations in force at the installation site.