List of products by supplier ISB

Cap self-lubricating...
Friction bushings in sintered bronze

Cap self-lubricating sintered bronze 4x8x8mm Selfoil A-4-8-8

A-4-8-8
€1.25 (€1.03 tax excl.)
Cap self-lubricating sintered bronze cylindrical 4x8x8mm, inner diameter 4mm, outer diameter 8mm, length 8mm. Suitable for work under radial load, no axial load or very low axial load. The oil contained in the bearing provides constant lubrication between the bushing and the shaft, so that the system does not need additional lubricant and is therefore...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 55mm INOX UCT211 - ISB

SSUCT211-ISB
€218.71 (€180.75 tax excl.)
Tensioning support with bearing inserted UCT211, both elements in stainless steel, for shaft diameter 55mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT211...
Cap self-lubricating...
Friction bushings in sintered bronze

Cap self-lubricating sintered bronze 4x8x10mm Selfoil A-4-8-10

A-4-8-10
€1.38 (€1.14 tax excl.)
Cap self-lubricating sintered bronze cylindrical 4x8x10mm, inner diameter 4mm, outer diameter 8mm, length 10mm. Suitable for work under radial load, no axial load or very low axial load. The oil contained in the bearing provides constant lubrication between the bushing and the shaft, so the system does not need additional lubricant and is therefore...
Tension supports with INOX bearings

Tensioner bracket with bearing shaft 60mm INOX UCT212 - ISB

SSUCT212-ISB
€274.91 (€227.20 tax excl.)
Tensioning support with bearing inserted UCT212, both elements in stainless steel, for shaft diameter 60mm. Self-aligning support bracket with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number: SSUCT212...
Cap self-lubricating...
Friction bushings in sintered bronze

Cap self-lubricating sintered bronze 4x10x10mm Selfoil A-4-10-10

A-4-10-10
€1.65 (€1.36 tax excl.)
Cap self-lubricating sintered bronze cylindrical 4x10x10mm, inner diameter 4mm, outer diameter 10mm, length 10mm. Model suitable for work under radial load, no axial load or very low axial load. The oil contained in the bearing provides constant lubrication between the bushing and the shaft, so that the system does not need additional lubricant and is...
View
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 12mm INOX UCPA201 - ISB

SSUCPA201-ISB
€57.51 (€47.53 tax excl.)
Reduced bridge type support with bearing inserted UCPA201, both elements in stainless steel, for 12mm diameter shaft. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
View
Reduced bridge supports with stainless steel bearings

Reduced bridge support with bearing shaft 15mm INOX UCPA202 - ISB

SSUCPA202-ISB
€57.51 (€47.53 tax excl.)
Reduced bridge type support with bearing inserted UCPA202, both elements in stainless steel, for shaft diameter 15mm. Self-aligning support with bearing ball bearing inserted with studs in the inner ring, sheet metal seal with nitrile rubber lip. Bearing with spherical outer rings for self-alignment and to compensate for misalignment. Part number:...
Showing 1153-1164 of 3437 item(s)
Product added to wishlist
Product added to compare.