• Pack
Solenoid valve fluids 3/4 2/2 closed 24Vcc combined drive - adajusa.es
Fluid solenoid valve 1/4" 2/2 closed combined drive adajusa.es
12Vdc 14W T30 diameter 13 - adajusacoil.
Solenoid valve connector size 22 - adajusa.es
Solenoid valve fluids 3/4 2/2 closed 24Vcc combined drive - adajusa.es
Fluid solenoid valve 1/4" 2/2 closed combined drive adajusa.es
12Vdc 14W T30 diameter 13 - adajusacoil.
Solenoid valve connector size 22 - adajusa.es

Solenoid valve fluids 3/4 2/2 closed 24Vcc combined drive D.18

€60.21 Tax included

€49.76 tax excl.

Electrovalve for home automation, fluids or process control, threaded 3/4" body in brass. Combined drive electrovalve, 2-way closed (NC), with 24Vcc 14W coil and connector. Step diameter: 18mm

Pressure max. 8.3 bar. Min pressure: 0 bar.

fluids:

  • air.
  • Inert gas.
  • Water (max. 75ºC).
  • Mineral oils.
  • Gasoleos.

Esquema neumático electroválvula 2/2 mando directo
Manufacturer: Aignep
Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

 

3/4", 2-way combined drive electrovalve, normally closed (NC), with coil at 24Vcc 14W, for use with fluids or air, combined drive. Brass body and stainless steel coil control.

Step diameter: 18mm

The main hole of the valve body is opened by an imbalance between the upper and lower surfaces of the membrane, when the coil is not active there is pressure in the upper chamber of the membrane, while in the lower chamber there is only pressure in the main hole of the valve, keeping it closed. When we give tension to the coil, we set the moving core in motion, opening the piloting hole and discharging the fluid from the upper chamber directly through the center of the membrane. The pressure difference at this time causes it to open the main hole.

This type of valves are prepared to open from 0 bar.

The working pressure ranges are:

  • Minimum pressure differential between inlet and outlet (ΔP bar): 0 bar.
  • Maximum pressure differential between inlet and outlet (ΔP bar): 8.3 bar

The electrovalve is normally closed, that is, without tension in the coil, the fluid or air will be interrupted through the electrovalve, when the coil is put into tension the passage of the fluid or air will occur.

The supply includes:

  • Electrovalve 3/4" 2/2 NC.
  • Coil 24Vcc 14W size 30.
  • Connector size 30.

The fluids with which this electrovalve can work are:

  • air.
  • Inert gases.
  • Water (maximum temperature 75ºC).
  • Mineral oils.
  • diesel.
  • fuel oil.

specifications:

  • Manufacturer: Aignep
  • Type of control: combined drive.
  • Thread size: 3/4".
  • number of tracks: 2.
  • number of positions: 2.
  • Configuration: 2/2 closed (NC).
  • Coil voltage: 24Vcc.
  • Coil power: 14W.
  • Size: 30.
  • Operator shaft diameter (for coil): 13mm.
  • Body: Brass.
  • Guide tube, cores and spring: Inox.
  • Type of gasket: NBR.
  • Type of fluids: Press and press on air, water (max. 75ºC), mineral oils, diesel, fuel oil.
  • Maximum pressure: 8.3 bar.
  • Iso 228 size: 3/4".
  • Ø step: 18mm.
  • Maximum fluid viscosity (cSt): 25.
  • Valve coefficient (Kv): 4.08 m³/h.
  • Minimum pressure differential (ΔP bar): 0 bar.
  • Maximum pressure differential (ΔP bar): 0-12.2 bar.
  • Working temperature of the electrovalve: -10ºC to +80ºC.
  • Fluid temperature: -10ºC to +90ºC.

Dimensiones electrovalvula mando combinado
Material for professional use, install respecting the regulations in force at the place of installation.

For more information you can download the technical data sheet by clicking on the "Attachments" tab

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

16 other products in the same category:

Customers who bought this product also bought:

Reviews
Product added to wishlist
Product added to compare.