Transformer 63VA E:230/400V S:24V IP-00
Transformer 63VA E:230/400V S:24V IP-00

Transformer 63VA E:230-400V S:115-230V IP-00

€33.76 Tax included

€27.90 tax excl.

Single-phase isolation transformer for switching, command and control, and general uses. The power of the transformer is 63VA, protection degree IP-00. Input voltage 230 or 400Vac, and two possible output voltages: 115V or 230Vac, with any combination the transformer can provide its maximum power.

Part number: TF040633200

Esquema transformador con 2 bobinados Adajusa

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
 
Single-phase isolatingtransformer for command, operation and control, and general uses. Input voltage of 230 or 400Vac and with two possible output voltages: 115 or 230Vac, each of them selectable by means of jumpers. The power provided by the transformer is 63VA, degree of protection IP-00. Depending on the connection of the two output secondaries, the transformer can supply 115Vac, with a current of 0.54 A (apparent current), or 230Vac, with a current of 0.27 A (apparent current)
The main application of this type of transformers is for command and control in industrial automation, and for general applications. They are intended to supply electrical devices where galvanic isolation between circuits and/or voltage level adaptation is required.
This type of transformers are reversible.

Technical characteristics of the transformer:

  • Part number: TF040633200
  • Type of transformer: Single-phase
  • Transformer primary voltage: 230-400 Vac, jumper selectable
  • Transformer secondary voltage: 115-230Vac
  • Transformer power rating: 63 VA
  • Maximum secondary current (In): 0.54A-0.27A, depending on the output voltage
  • Insulation class: T40/F
  • Frequency: 50/60 Hz.
  • Protection: IP-00
  • Protection class: I
  • Transformer test voltage
    • 4.5 KV between windings
    • 3.5 KV between windings and ground
  • Connection: Screw-faston terminals
  • Winding: in enameled copper wire class H
  • Transformer mounting: by means of screws
  • Fixing system: By means of DIN 4307 angles
  • Certification: UNE-EN61558-2-4
Dimensions

Dimensiones transformadores TF Adajusa - Manumag

  • A: 84 mm
  • B: 92 mm
  • C: 100 mm
  • D: 64 mm
  • H: 47 mm
  • MxN: 9x4,8 mm
  • Weight: 1,45 Kg
Electrical connection

Esquema electrico transsformadores seie paralelo 115-230

The transformer is supplied without any type of overload protection, it is mandatory to install them to avoid overloading the transformer. The power and current indicated are apparent, the active current provided by the transformer will depend on the power factor of the connected load.
Material for professional use, install in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

16 other products in the same category:

Customers who bought this product also bought:

Reviews
Product added to wishlist
Product added to compare.