Mechanical speed drive size 71 (0.33-0.5HP)

Mechanical speed reducer inverter,planetary discs, manually operated by manoeuvre steering wheel, to be coupled to motors with flange type B5 and size 71.

Mechanical motorvariators,manufactured with special advanced technology, which makes them specially adapted for work in the maintenance industry, ceramics, packaging, chemical, textile, food, boiling machine, automatic production and assembly lines, and in general, those where speed regulation is required.

Its main features are as follows:

• Continuous adjustment field 1:5,3 made in the entire range with respect to the input speed.
• Speed constant ±0.5% at maximum speed and ±1% at minimum.
• Sense of non-existent rotation with concordant input and output.
• Silent and uniform operation.
• Good sizing to ensure long life even with continuous service and at full load.
• Torque increase, up to twice the nominal at the minimum speed.
• High starting torque.
• High performance, approximately 84% at maximum speed.

Technical details:

• Reducer size: 71.
• Output shaft: 14mm.
• Saida flange: 160mm
• Input shaft: 14mm.
• Input flange: 160mm.

Recommended engines:

Dimension Summary:

• A: 103.5mm.
• E: 30mm.
• D: 14mm.
• N: 160mm.
• O: 9mm.

It should be noted that this type of mechanical drives require maintenance, the amount of lubrication oil must be checked and that they cannot be regulated standing still, if regulation is attempted with the inverter stopped, there will be a mismatch of the planetarium system, you cannot work under these conditions, there will be excessive heating of the regulator and if this situation is maintained over time , a serious breakdown thereof. Please note that such incidents are not covered by the warranty.