Rodamientos de rodillos cilíndricos una hilera NJ407 35x100x25mm - FAG

NJ cylindrical roller bearings are pillow block bearings that can withstand high radial forces and also absorb axial forces in one direction and can therefore guide shafts in the axial direction in that direction. These bearings have two ribs on the outer ring and one rib on the inner ring.

The outer and inner rings can be moved axially, relative to each other and from the center position.

The dimensional and form tolerances of the bearings correspond to tolerance class PN according to DIN 620.

Dimensions: Ø35xØ100x25mm .

For other references or measures consult.

Characteristics:

• Hole diameter (d): 35mm
• Outer diameter (D): 100mm
• Width (B): 25mm
• Dynamic load capacity, radial (C _r): 102,000 N
• Static load capacity, radial (C _0r): 83,000 N
• Fatigue load limit, radial (C _ur): 13,600 N
• Rotation limit speed (n _G ): 12,000 1/min
• Axial displacement (s): 2.6mm

Material for professional use, install in compliance with the regulations in force at the place of installation.

For more information, you can download the technical sheet by clicking on the "Annexes" tab.