Switch two speeds dahlander 40a red lever 48x48 with lock - Giovenzana
Switch for two-speed motor, dahlander type, intensity up to 40a., rotary control 90º, positions: 1-0-2, 48x48mm faceplate in yellow and lever in red, possibility of locking by padlock, made in accordance with the strictest European standards that allow to meet the requirements in terms of safety.
Switch that allows you to start and stop, and select the speed of rotation in 2-speed motors type dahlander.
Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.
- Inverter switch C0400014R
- Front controller 002/0008
Note: Padlock not included in the supply.
Material for professional use, install respecting the regulations in force at the place of installation.
40A three-phase two-speed motor switch (dahlander) for electric motors. Allows start-up, stop and speed selection on two-speed dahlander-type motors, for 45o 1-0-2 rotary control.
Suitable for interruption, connection and switching of electrical circuits as well as direct start of motors and turn inverter in machines.
Switch switch for 2-speed three-phase 40A motors for dahlander electric motors.
This series of rotary switches have been made according to the strictest European and international standards (IEC/EN 60947-3, UL508), which allows them to meet all safety requirements.
Mounting by transpanel fixation (rear-frame), degree of protection IP-20 in terminals, self-cleaning contacts and indelible laser marking. Body made of UL94 VO self-extinguishing material.
- Brand: Giovenzana.
- Supplier Reference: C0400014R
- Function: switch for 2-speed dahlander motors.
- Number of poles: 3.
- Rated voltage Ue: 690V.
- Nominal current Ie (AC21A): 40A.
- Nominal interrupt capacity: 5kA.
- Number of manoeuvres / hours: 120.
- Mechanical durability: 1,000,000 maneuvers.
- Built-in mounting.
- Degree of protection:
- Type 1-4-4X controls: IP-65.
- Lever-only controls: IP-40.
- Bornes: IP-20.
- Standards: EC; IEC60947; IEC60204; UL508 CSA 22.2 No14
Table of intensities and powers of use:
- AC-21A usage category: 40A.
- AC-22A usage category: 40A.
- AC-23A Usage Category:
- Standard three-phase motors 230Vac: 35A - 11kW.
- 400Vac three-phase standard motors: 30A - 18.5kW.
- AC-3 Usage Category:
- 230Vac three-phase standard motors: 27A - 9.5kW.
- Standard three-phase motors 400VAc: 27A - 15kW.
Face plate of 48x48 color gray black lever, for cam inverter switches of 12-16 and 20a, giovenzana brand. For panel mounting (back box). Positions 1-0-2.
Front plate for transpanel mounting of cam inverter switches.
- Brand: Giovenzana.
- Manufacturer Reference:
Yellow plate and red lever with 48x48mm lock: 004/0008 (Padlock not included)
- Finish: Yellow.
- Lever color: Red.
- Dimensions: 48x48mm.
- Block: No.
- Positions: 1-0-2.
- Rotation: 45o.
The 004/0008 control board is valid for:
Note: These control boards are only valid for the series listed above of the Giovenzana brand.
Note: The switch is not included in the supply.
4 other products in the same category: