Disconnector switch 3 poles 25a full 67x67 red yellow with lock se giovenzana series

Three-phase disconnector switch 25a for inductive loads (Electric motors) and general control. Rotary control 90º, 67x67mm, with two positions 0-1. Faceplate in yellow colo and lever in red possibility of locking by padlock.

This series of rotary switches have been made according to the strictest European and international standards (IEC/EN 60947-3, UL508), which allows them to meet all safety requirements.

Mounting by rear-panel fixation (back frame), IP-20 protection grade in terminals, self-cleaning contacts and indelible laser marking. Body made of self-extinguishing material UL94 VO.

This three-phase switch is suitable for three-phase motors up to 7.5kw connected to 230Vac or 11kw connected to 400Vac.

The supply includes:

• Switch SE163003R
• Front controller 010/0001

Note, the supply does not include padlock.

characteristics:

• Brand: Giovenzana.
• Vendor reference: SE163003R.
• number of poles: 3.
• Rated voltage Ue: 690V.
• Ith nomitanl thermal intensity: 32A.
• Nominal intensity Ie (AC21A): 16a.
• Nominal intensity Ie (AC22A): 25a.
• Nominal intensity Ie (AC23A):25a.
• Nominal intensity Ie (AC3):25a.
• Nominal interrupt capacity: 10kA.
• Contacts: Slow opening of double interrupt.
• Number of maneuvers / hours: 120.
• Mechanical durability: 100,000 maneuvers.
• Maneuver angle: 90º.
• Built-in assembly.
• Degree of protection:
  • Controls type 1-4-4X: IP-65.
  • Bornes: IP-20.
• Standards: EC; IEC60947; IEC60204; UL508 CSA 22.2 No. 14

Table of intensities and powers of employment:

• Use category AC-21A: 32A.
• Use category AC-22A: 25a.
• Use category AC-23A:
• Standard three-phase motors 230Vac: 25a - 7,5kW.
• Standard three-phase motors 400Vac: 25a - 11kW.
• Use category AC-3:
• Standard three-phase motors 230Vac: 22A - 7,5kW.
• Standard three-phase motors 400VAc: 22A - 11kW.

dimensions:

assembly:

As additional elements we can add the following references:

• Closed auxiliary contact: GIPL004001
• Open auxiliary contact: GIPL004002
• Auxiliary contact fastening plate: GI11814021

Material for professional use, has to be installed respecting the regulations in force at the place of installation.