• Pack
Solenoid valve fluids 3/4 2/2 230Vac 22VA...
Solenoid valve fluids 3/4 2/2 230Vac 22VA closed indirect drive INOX FKM

Solenoid valve fluids 3/4 2/2 230Vac 22VA closed indirect drive INOX FKM

€81.32 Tax included

€67.21 tax excl.

Solenoid valve for home automation, fluids or process control, thread 3/4" in INOX AISI 316. Indirect drive closed 2-way membrane solenoid valve (NC). Hole diameter 20 mm

Working pressure max. 13 bar. dif pressure. min. 0.5 bar.

Coil for solenoid valve size 30mm, voltage 230Vac., with a consumption of 22VA. Connector 30 mm.

FKM gaskets: Temperature: -10o to +140o C. Fluid: Air, inert gas, water max 75o C, mineral oils, gasoline, fuel oil.


Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

 

3/4" 2-way, normally closed (NC) membrane solenoid valve for use with fluids, indirectly operated. Body: INOX AISI 316.

Coil for solenoid valve size 30mm, voltage 110Vac., with a consumption of 22VA.

Plastic connector 30 mm.

Hole diameter: 20 mm

The main hole of the valve body is opened by the effect of an imbalance between the upper and lower surfaces of the membrane, when the coil is not activated, there is pressure in the upper chamber of the membrane, while in the lower chamber there is only pressure in the main hole of the valve, keeping it closed. When we give tension to the coil, we move the moving core, opening the piloting hole and doing the fluid discharge from the upper chamber, the pressure difference at this time causes it to open the main hole.

In this type of solenoid valves there must be a small pressure difference between the inlet and the outlet for it to work properly.


Supply includes:

  • 3/4" 2-way NC solenoid valve
  • Coil 110Vac 22VA
  • Connector 30 mm

specifications:

  • Manufacturer: Aignep
  • Reference: RSP-20J
  • Type of control: indirect drive.
  • Thread size: 3/4".
  • Number of tracks: 2.
  • Number of positions: 2.
  • Configuration: 2/2 closed (NC).
  • Coil voltage: 110Vac
  • Consumption: 22VA
  • Body: INOX AISI 316.
  • Guide tube, nuclei and spring: Stainless steel.
  • Gasket type: FKM.
  • Fluid type: Pressure air, water (max. 75oC), mineral oils, diesel, oil.
  • Maximum pressure: 13 bar.
  • ISO size 228: 3/4".
  • Step in: 20.
  • Minimum pressure differential (P bar): 0.5 bar.
  • Maximum Pressure Differential (P bar): 13
  • Working temperature of the solenoid valve: -10oC to +80oC.
  • Fluid temperature: -10oC to +140oC.
  • Installation: Never with the coil down.


Material for professional use, install in compliance with the regulations in force at the place of installation.

To expand the information you can download the data sheet by clicking on the tab "Attachments"

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

16 other products in the same category:

Reviews
Product added to wishlist
Product added to compare.