Filter EMC single-phase 12A | Adajusa
Filter EMC single-phase 12A | Adajusa

Filter EMC 12A 230V Series FN2060

€35.02 Tax included

€28.94 tax excl.

General purpose two-stage AC/DC EMC filter, rated current 12A, single-phase mains supply, medium-high attenuation. Specially designed for noisy applications requiring good attenuation.

Solution for electromagnetic compatibility (EMC) compliance in electrical and electronic equipment. Improve equipment immunity, efficiency and safety by controlling interference limited by EMC legislation. With the use of the appropriate filter, the disturbance levels are reduced below the maximum allowed values




Part number: FN2060-12-06

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
Privacy
Shipments
Returns
 

Solution for electromagnetic compatibility (EMC) compliance. General purpose two-stage AC/DC RFI filter, 12A rated current, single-phase mains supply, medium-high attenuation. FN2060 series filters are specially designed for noisy applications requiring good differential attenuation.

Single-phase filters for electrical and electronic equipment help to comply with international standards. They improve equipment immunity, efficiency and safety. With the use of the appropriate filter, disturbance levels are reduced to below the maximum values allowed by regulations.

Easy and fast chassis mounting. Intended for a wide variety of uses offering a good size/amperage ratio


Typical applications:

  • Electrical and electronic equipment
  • Domestic equipment
  • Office equipment
  • Data communication equipment
  • Machinery
  • Noisy applications
  • Industrial applications





Features:

  • Manufacturer/Supplier: Schaffner
  • Part number: FN2060-12-06
  • Nominal voltage (*): 250Vac 50/60 Hz / 250Vdc
  • Operating frequency: DC at 400Hz
  • Rated current: 12A at 40°C (13,8A at 25°C)
  • Leakage current (**)0,66mA (250Vac, 50 Hz) / 0,38mA (120Vac, 60 Hz)
  • Power loss: 6.2W (25°C/DC)
  • Inductance (***): 0.58mH
  • Capacitance (***): Cx 0.47µF / Cy 4.7nF
  • Resistance (***): 470kΩ
  • Attenuation type: Medium-High
  • Number of stages: 2
  • Operating temperature: -25°C to +100°C
  • Connection: Faston terminals 6,3x0,8mm
  • Certification: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 (applies to AC and DC applications)
  • Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
  • Overvoltage category: II according to IEC 60664-1
  • Pollution degree: 2 according to IEC 60664-1
  • Reliability: MTBF 950,000h at 40ºC/230V
  • Weight: 190gr

(*) maximum RMS operating voltage at rated frequency or maximum DC operating voltage
(**) Maximum leakage under normal AC operating conditions (according to IEC60939-3). Note: if the neutral line is interrupted, the worst case leakage could reach twice this level
(***) Tolerances applied: Inductance: -30/+50 %, Capacitance: ±20 %, Resistance: ±10 %




Wiring diagram:





Filter attenuation:




According to CISPR 17; CM=50 Ω/50 Ω yesm; DM=50 Ω/50 Ω asymmetrical




Dimensions:





A: 85mm; B :54mm; C: 30.3mm; D: 64.8mm; E: 49.8mm; F: 75mm; G: 27mm; H: 12.3mm; I: 20.8mm; J: 19.9mm; K: 5.3mm; L: 6.3mm;
M: 0.7mm


Material for professional use, it has to be installed in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

3 other products in the same category:

Customers who bought this product also bought:

Home
Reviews
Product added to wishlist
Product added to compare.