Relay 230Vac 1 contact 12A RSB SERIES - SCHNEIDER

Interface relay with 1 contact 230Vac. 1 switched type contact (STPD) of 12A and 5 pins to be able to be inserted on a socket of the SCHNEIDER RSZE series. Designed for general uses and for other specific applications such as control panels, control and distribution panels, automation, management and control of electrical networks, lighting of roads and tunnels, switches and switches, etc.


Characteristic:

• Manufacturer: SCHNEIDER
• Reference: RSB1A120P7
• RSB SERIES - HARMONY
• Standard contact operation
• STPD Contact Configuration
• Mounting sockets seriesRSZE1S35M, RSZE05P

Technical characteristics:

• Contact configuration: 1 switched
• Control circuit voltage: 230Vac 50/60Hz
• Rated thermal current: 12A at -40…40°C
• Pin Shape: Flat (PCB Type)

�
• Number of pins: 5
• Rated operating voltage: 184...345VacC 50/60Hz
• Rated isolation voltage: 400V
• Withstand voltage spikes: 3.6 kV
• Rated current of use: 12A, NA ( AC-1/DC-1) / 6A, NC ( AC-1/DC-1)
• Minimum switching current: 10mA
• Maximum switching voltage: 300V direct current
• Maximum switching capacity: 3000VA / 336W
• Resistive rated load: 12A / 250Vac , 12A / 28Vdc
• Minimum switching capacity: 120mW at 10mA, 12V 
• Mechanical durability: 10,000,000 cycles
• Electrical durability: 100,000 cycles
• Standard contact material: AgNi
• Ambient temperature: -40 to +85 ^o C
• Degree of protection: IP40 conforming to EN/IEC 60529
• Operating position: Any position

Dimensions (mm/in):




Wiring diagram:


NOTE: For DC input, A1 has to be +, otherwise it will cause a short circuit from the protection module.





For more information, you can download the technical sheet by clicking on the "Annexes" tab. Material for professional use, it must be installed by qualified personnel in compliance with the regulations in force at the place of installation.