• Pack
Solenoid valve fluids 1 2/2 closed 12Vcc indirect drive - adajusa.es
Fluid solenoid valve 3/8" 2/2 closed - adajusa.es
Solenoid valve coil 24Vcc 8W T30 diameter 10 - adajusa.es
Solenoid valve connector size 30
Solenoid valve fluids 1 2/2 closed 12Vcc indirect drive - adajusa.es
Fluid solenoid valve 3/8" 2/2 closed - adajusa.es
Solenoid valve coil 24Vcc 8W T30 diameter 10 - adajusa.es
Solenoid valve connector size 30

Fluid solenoid valve 1 2/2 closed 12Vcc 8W indirect drive D.25 NC

€74.44 Tax included

€61.52 tax excl.

Solenoid valve for home automation, fluids or process control, 1" thread, usually closed and indirect drive, with 12Vdc 8W coil. Pitch diameter: 25mm

Max. working pressure 25 bar, and pressure diff. min. 0.15 bar.

Fluids:

  • Air.
  • Inert gas.
  • Water (max. 75ºC).
  • Mineral oils.
  • Fuel oils.

Esquema electroválvula 2 vías accionamiento indirecto

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

 

1", 2-way, normally closed (NC) membrane solenoid valve with 12Vdc 8W coil, for use with fluids or air, indirectly operated. Brass body and coil control in stainless steel.

Pitch diameter: 25mm

In this type of solenoid valves, indirect drive, there must be a small pressure difference between the inlet and the outlet for it to work properly.

The maximum working pressure is 25bar and the pressure differential (P bar) must be at least 0.15 bar.

The solenoid valve is normally closed, i.e. without tension in the coil, the fluid or air will be interrupted through the solenoid valve, when the coil is put into tension the passage of the fluid or air will occur.

The fluids with which this solenoid valve can work are:

  • air.
  • Inert gases.
  • Water (maximum temperature 75oC).
  • Mineral oils.
  • diesel.
  • fuel oil.

Supply includes:

  • Solenoid valve 1" 2/2 NC.
  • Coil 12Vcc size 30.
  • Connector size 30.

specifications:

  • Manufacturer: Aignep
  • Type of control: indirect drive.
  • Thread size: 1".
  • Number of tracks: 2.
  • Number of positions: 2.
  • Configuration: 2/2 closed (NC).
  • Body: Brass.
  • Coil voltage: 12 Vdc.
  • Coil power: 8W.
  • Coil size: 30mm
  • Guide tube, nuclei and spring: Stainless steel.
  • Gasket type: NBR.
  • Fluid type: Pressure air, water (max. 75oC), mineral oils, diesel, oil.
  • Maximum pressure: 25 bar.
  • ISO size 228: 1".
  • Step: 25mm.
  • Maximum fluid viscosity (cSt): 25.
  • Valve coefficient (Kv): 10.97 m3/h.
  • Minimum pressure differential (P bar): 0.15 bar.
  • Maximum pressure differential (P bar): 0.15 - 25bar.
  • Working temperature of the solenoid valve: -10oC to +80oC.
  • Fluid temperature: -10oC to +90oC.
  • Installation: Never with the coil down.

Dimensiones electroválvula para fluidos 2/2 NC accionamiento indirecto
Material for professional use, install in compliance with the regulations in force at the place of installation.

To expand the information you can download the data sheet by clicking on the tab "Attachments"

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

16 other products in the same category:

Customers who bought this product also bought:

Reviews
Product added to wishlist
Product added to compare.